Link electronic Wireless 802.11g AP Router user manual User’s Guide

Page 24

frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission.

Fragmentation Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. It should remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor modifications of this value are recommended.

AP Mode or Wireless Bridge Mode: 802.11g AP Router can operate in two modes. When the AP Mode is selected, the device operates as a normal Access Point. Proving every wireless client station a join network point.

The Wireless Bridge Mode will be able to join different AP Router wirelessly by input the destination MAC Address.

* Click Apply to save your settings.

User’s Guide

23

Image 24

Contents Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification Hardware Installation PWR/STATWeb Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerDynamic IP Setting Static IP Address ∙ Default Gateway∙ User Name and Password Internet IP Address and Subnet MaskUser’s Guide WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSecurity User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoUser’s Guide Dhcp Server 192.168.1.100User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters Internet Access Policy To create or edit a policy, follow these instructionsSummary Virtual Server User’s GuideEnable Port TriggeringRouting Table Dynamic RoutingStatic Routing, DestinationDelete This Entry Click the Delete This Entry button Click the Show Routing TableShow Routing Table Dynamic DNS DynDNS.orgTroubleshooting My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Basic FunctionsUser’s Guide