Link electronic Wireless 802.11g AP Router user manual Introduction

Page 4

1. Introduction

Thank you for purchasing your AP Router Wireless 802.11g AP Router.

This user guide will assist you with the installation procedure.

The package you have received should contain the following items:

§AP Router Wireless 802.11g AP Router

§User Guide

§Power Supply / Cord

§Ethernet Cable

Note: if anything is missing, please contact your vendor

User’s Guide

3

Image 4

Contents Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification Hardware Installation PWR/STATWeb Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerDynamic IP Setting Static IP Address ∙ Default Gateway∙ User Name and Password Internet IP Address and Subnet MaskUser’s Guide WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSecurity User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoUser’s Guide Dhcp Server 192.168.1.100User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters Internet Access Policy To create or edit a policy, follow these instructionsSummary Virtual Server User’s GuideEnable Port TriggeringRouting Table Dynamic RoutingStatic Routing, DestinationClick the Show Routing Table Delete This Entry Click the Delete This Entry buttonShow Routing Table Dynamic DNS DynDNS.orgTroubleshooting My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Basic FunctionsUser’s Guide