Link electronic Wireless 802.11g AP Router user manual Primary Setup

Page 8

4.1. Primary Setup

MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER

To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect the WEB management 192.168.1.1 .

Primary Setup

This screen contains all of the Router's basic setup functions.

.

Most users will be able to configure the AP Router and get it working properly using the settings on this screen. Some Internet Service Providers (ISPs) will require that you enter AP Router Wireless 802.11g AP Router specific information, such as User Name, Password, IP Address, Default Gateway Address, or DNS IP Address. This information can be obtained from your ISP, if required.

User’s Guide

7

Image 8

Contents Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification Hardware Installation PWR/STATWeb Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerDynamic IP Setting Static IP Address ∙ Default Gateway∙ User Name and Password Internet IP Address and Subnet MaskUser’s Guide WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSecurity User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoUser’s Guide Dhcp Server 192.168.1.100User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters Internet Access Policy To create or edit a policy, follow these instructionsSummary Virtual Server User’s GuideEnable Port TriggeringRouting Table Dynamic RoutingStatic Routing, DestinationShow Routing Table Delete This Entry Click the Delete This Entry buttonClick the Show Routing Table Dynamic DNS DynDNS.orgTroubleshooting My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Basic FunctionsUser’s Guide