Liebert PSI XR user manual Normal Mode, Buck/Boost Mode, Battery Mode, Battery Recharge Operation

Page 21

Operational Modes

5.0OPERATIONAL MODES

5.1Normal Mode

When the UPS is in Normal Mode, the Normal Mode Indicator illuminates green.

5.2Buck/Boost Mode

The Automatic Voltage Regulator (AVR) circuitry compensates for fluctuations in utility power, such as voltage surges and sags. When the Liebert PSI XR detects an abnormality, it raises the undervolt- age (boost) or lowers the overvoltage (buck) as needed. The AVR operates automatically and main- tains the output voltage to the connected equipment, without utilizing the batteries.

LED 1 flashes green and LED 9 illuminates steady green when the UPS is in Boost Mode. LED 2 flashes green and LED 9 illuminates steady green when the UPS is in Buck Mode (see 9.0 - Trouble- shooting for details).

5.3Battery Mode

The UPS switches to Battery Mode in the event of an extreme input voltage/frequency condition or utility failure.

When the UPS is in Battery Mode, the Battery Indicator illuminates amber and an alarm sounds at two-second intervals. As capacity decreases, fewer indicators remain illuminated.

When a Low Battery condition occurs, the Battery Indicator flashes amber and an alarm sounds at one-second intervals. Refer to Table 8 for approximate battery run times.

5.4Battery Recharge Operation

Once utility power is restored, the UPS resumes normal operation and the Battery Charger begins recharging the batteries.

17

Image 21
Contents Liebert PSI XR Page Table of Contents Tables Battery MaintenanceBattery Handling Precautions Important Safety InstructionsPage Status Change Button Glossary of SymbolsIntroduction Port 15A for 1500VA Nema 5-15RPort Not shown for clarity RS232 DB-9 Receptacles #1 and #2 3000VA-rear viewRack-Mount WHAT’S IncludedHandles Mounting Hardware Screws and Washers Fixed Mounting RailsPreparation InstallationRelative humidity Non-condensingStep Tower UPS InstallationConvert the Liebert PSI XR for rack installation Rack-Mount UPS Conversion and InstallationConnect Input Power and Load Orient Display for InstallationConnect Computer Interface Port Connect Network Surge protectionNetwork Equipment Network surgeEPO Switch External Battery Cabinet InstallationBattery cabinet connector color key Connect battery cabinets to UPS Display and status indicators function, legend Controls and IndicatorsName Status Indicators Description 3 4Control Buttons Status IndicatorsStatus indicators-color, illumination mode StatusLED Buck/Boost Mode Normal ModeBattery Mode Battery Recharge OperationRemote Shutdown Via the DB-9 Connector DB-9 ConnectorCommunication DB-9 pin assignmentUPS Inverter/Transfer Voltage Configurations RJ-45 Data Line Protection ConnectorsVoltage configurations UPS CommunicationsBattery Charging, Storage Internal Battery Replacement ProcedureBattery Maintenance Liebert PSI XR specifications SpecificationsBattery cabinet specifications Model NumberBatteries Liebert PSI XR battery run times Troubleshooting Troubleshooting Troubleshooting Page Iti Ne tTi n That