Kowa KE811CT instruction manual

Page 24

※When OPTION button is used as alternate, control command can transmit ON/OFF registration command. When OPTION button is used as momentary, control command can transmit ON registration command only.

※Memory size of control command is 32bytes (8 commands). The data length that can be sent at a time is 32bytes.

If more than 32bytes data is transmitted, please send the data after answer-back is returned.

If control command is transmitted before answer-back is returned, it may not be executed.

※During serial communication, the operation of button may not be valid.

-18-

Image 24

Contents KE811CTw-type For U.S.A Usage Cautions Do not stick any foreign objects into the product Disconnect all cables before moving this product Index Main unit of KE811CTw-type AC adapter Power cord About this product KE811CTw-typeRack mounting kit ×2 Screw ×4 Terminal 6-pin ×2 Terminal 2-pin ×2：10 ～300m32.8 ～984.2ft ． The name and function of each parts After pressing SUB OUT button⑨ SERIAL3 Connector for SUB OUT Connector These connectors areRJ-45 twisted pair connector for CAT5 ．Rear panelAudio input connector RCA connector forScrew for frame ground Corresponding to Input 1-4 at front panelConnection Cables Connector …pair 1 3,6…pair 2 4,5…pair 3 7,8…pairCable mounting kit ．Composite video ．Component video．RGB video ．Audio Setting of front dip switch OperationSetting of bottom dip switch OFFPage Serial interface GND Connection of RS232C cableRemark Page Delimiter Character output line select command Return Ex.5 Turning on of PowerEx.1 input IN2, output CAT5 Ascii character representationReturn ≦32 33H33H 4CH 44H Registration methodParallel connector signal arrangement Parallel interface．Specifications ．The Specifications of this productSpecification of control system connectors Button output・Do not supply more than AC/DC Connector for tally output Ex. When putting LED forward voltage 2V, maximum current isPlease use within 20mA when DC5V is used Connector for parallel input Please input as following timing．Trouble shooting Problem Please check the followingSound has noise 2006.4.14