Kowa KE811CT instruction manual :10 ~300m32.8 ~984.2ft

Page 8

1-2 General Information

This product, KE811CT(w-type), is a transmitter for long distance transmission of one line selected from RGB video, component video or composite video through a twisted pair cable (CAT5e or CAT6). In addition to video , one line of audio (stereo) , and serial command (*1) can be transmitted through a serial port.

By INPUT switch, it is possible to control PDP or projector at the same time as switching of video and audio .

(*1) Beforehand registered serial command is transmitted.

The minimum recommended transmission distance is 10m(32.8ft). The maximum recommended transmission distance depends on the refresh rate and resolution. The transmission distance (when using our recommended cable) is as follows.

Name of signal

Transmission distance

Audio signal/serial data

10300m(32.8984.2ft)

Composite signal

10300m(32.8984.2ft)

YPbPrYCbCr

10300m(32.8984.2ft)

640×480

10200m(32.8656.1ft)

800×600

10180m(32.8590.5ft)

1024×768

10150m(32.8492.1ft)

1280×1024

10120m(32.8393.7ft)

1600×1200

10100m(32.8328ft)

 

 

Recommended cable : OKTP-E5-P-AWG24x4P

(OKANO ELECTRIC WIRE CO.,LTD)

The features of this product are below mentioned.

Transmitting one line for twisted pair (2 distributed outputs) and one line for monitor independently selected from video (three composite and one component signals) 4 inputs and RGB 4 inputs.

Audio and command are transmitted at the same time.

Beforehand registered (*2) command can be transmitted by pressing of INPUT buttons.

Command transmission may be allocated to DISPLAY POWER, OPTION and INPUT buttons.

Screen etc.. can be controlled by contact output in conjunction with OPTION button selecting.

Tally output of rear panel is transmitted synchronizing with buttons.

This product can be controlled by serial communication and parallel input.

(*2) Exclusive software is required to register commands.

-2-

Image 8
Contents KE811CTw-type For U.S.A Usage Cautions Do not stick any foreign objects into the product Disconnect all cables before moving this product Index Main unit of KE811CTw-type AC adapter Power cord About this product KE811CTw-typeRack mounting kit ×2 Screw ×4 Terminal 6-pin ×2 Terminal 2-pin ×2:10 ~300m32.8 ~984.2ft . The name and function of each parts After pressing SUB OUT button⑨ SERIAL3 Connector for SUB OUT Connector These connectors areRJ-45 twisted pair connector for CAT5 .Rear panelAudio input connector RCA connector forScrew for frame ground Corresponding to Input 1-4 at front panelConnection Cables Connector …pair 1 3,6…pair 2 4,5…pair 3 7,8…pairCable mounting kit .RGB video .Composite video.Component video .Audio Setting of front dip switch OperationSetting of bottom dip switch OFFPage Serial interface GND Connection of RS232C cableRemark Page Delimiter Character output line select command Return Ex.5 Turning on of PowerEx.1 input IN2, output CAT5 Ascii character representation33H 4CH Return ≦3233H 44H Registration methodParallel connector signal arrangement Parallel interface.Specifications .The Specifications of this product・Do not supply more than AC/DC Specification of control system connectorsButton output Please use within 20mA when DC5V is used Connector for tally outputEx. When putting LED forward voltage 2V, maximum current is Connector for parallel input Please input as following timing.Trouble shooting Problem Please check the followingSound has noise 2006.4.14

KE811CT specifications

The Kowa KE811CT is a highly regarded model in the world of high-quality binoculars, renowned for its exceptional optical performance and rugged design. This model has been meticulously crafted to meet the needs of bird watchers, nature enthusiasts, and professionals who require reliable and high-resolution optics.

One of the standout features of the Kowa KE811CT is its impressive magnification and objective lens diameter. With an 8x magnification combined with a 42mm objective lens, these binoculars offer a bright and clear field of view. This specification enables users to observe distant subjects with precision while maintaining stability and minimizing hand-shake.

The KE811CT utilizes Kowa's proprietary XD (extra-low dispersion) glass, which significantly reduces chromatic aberration. This technology enhances color fidelity and sharpness, ensuring that images are vivid and life-like. The high-quality optics provide excellent light transmission, resulting in bright images even in low-light conditions such as dawn or dusk.

Another key characteristic of the Kowa KE811CT is its robust construction. These binoculars feature a waterproof and fog-proof design, making them suitable for outdoor use in various weather conditions. The rubber armor coating provides a secure grip and protects the binoculars from shock and impact. This rugged build ensures that the Kowa KE811CT can withstand the rigors of extensive field use.

In addition to its optical and structural features, the Kowa KE811CT offers a generous field of view, allowing for easy tracking of moving subjects. The close focus capability of this model enables users to observe detailed subjects at short distances, making it versatile for both bird watching and nature observation.

Furthermore, the eyecups are designed for maximum comfort and can accommodate users with or without glasses, enhancing usability for a wide range of audiences. Overall, the Kowa KE811CT is engineered to provide an exceptional viewing experience through its combination of advanced optics, rugged construction, and user-friendly design, making it a top choice for anyone seeking premium binocular performance in the field.