Kowa KE811CT instruction manual .Trouble shooting, Problem Please check the following

Page 33

8Trouble shooting

Problem

Please check the following

The video can't be

Is the power of the connection equipment turned on ?

seen

Is the power adapter cable properly connected to

 

AC100-240V line and this product ?

 

Is the POWER CONT button of this product turned on?

 

Is the CAT5e or CAT6 cable properly connected to OUT 1

 

or OUT2 of this product?

 

Isn't unexpected fore applied to the CAT5e or CAT6 cable

 

connected to OUT1 or OUT2 of this product ?

 

Is the cable properly connected to the video input connector?

 

Is the INPUT button properly selected ?

 

Is the CAT5SUB button properly selected ?

 

Are cables properly connected to IN connectors?

 

Is the length of the cable within the recommended maximum

 

transmission distance ?

 

Are the cables wired correctly?

 

Is the power of the twisted pair receiver turned on ?

 

Did you adjust a LEVEL /PEAKING of a twisted pair receiver?

The video is

Is the twisted pair cable near the AC line? It should be far

flickering or there

from the line.

is noise

Is there a source causing noise close to AC adapter of this

 

product ? A noise filter should be used in case of noise.

 

Is the CAT5e or a CAT6 cable properly connected to OUT 1 or

 

OUT2 of this product ?

 

Isn't unexpected fore applied to the CAT5e or CAT6 cable

 

connected to OUT1 or OUT2 of this product ?

 

Is the cable properly connected to the video input connector

 

of this product?

 

Are cables properly connected to IN connectors?

 

Is the length of the cable within the recommended maximum

 

transmission distance?

 

Did you adjust a LEVEL /PEAKING of a twisted pair receiver?

Sound can't be output Is the power of the connection equipment turned on ?

Is the POWER CONT button of this product turned on?

Is the power adapter cable properly connected to AC100-240V line and this product ?

Is the INPUT button properly selected ?

Is the CAT5SUB button properly selected ?

Is the CAT5e or CAT6 cable properly connected to OUT 1 or OUT2 of this product?

Isn't unexpected fore applied to the CAT5e or CAT6 cable connected to OUT1 or OUT2 of this product ?

Is the cable properly connected to the AUDIO IN connector of this product?

Is the power of the twisted pair receiver turned on ?

Is the length of the cable within the recommended maximum transmission distance?

Reference

3-3.Cable mounting kit and Rack mounting kit

4-3.Operation of buttons 4-3.Operation of buttons

1-2.General information

3-2.Preparation of cable

Please refer to the instructions manual of the receiver with this product.

3-3.Cable mounting kit and Rack mounting kit

1-2.General information

Please refer to the instructions manual of the receiver with this product .

- - -

- - -

3-3.Cable mounting kit and Rack mounting kit

1-2.General information

-27-

Image 33
Contents KE811CTw-type For U.S.A Usage Cautions Do not stick any foreign objects into the product Disconnect all cables before moving this product Index About this product KE811CTw-type Main unit of KE811CTw-type AC adapter Power cordRack mounting kit ×2 Screw ×4 Terminal 6-pin ×2 Terminal 2-pin ×2:10 ~300m32.8 ~984.2ft After pressing SUB OUT button . The name and function of each parts⑨ SERIAL3 Connector These connectors are Connector for SUB OUTRJ-45 twisted pair connector for CAT5 .Rear panelRCA connector for Audio input connectorScrew for frame ground Corresponding to Input 1-4 at front panelConnection …pair 1 3,6…pair 2 4,5…pair 3 7,8…pair Cables ConnectorCable mounting kit .Composite video .Component video.RGB video .Audio Operation Setting of front dip switchOFF Setting of bottom dip switchPage Serial interface Connection of RS232C cable GNDRemark Page Ex.5 Turning on of Power Delimiter Character output line select command ReturnEx.1 input IN2, output CAT5 Ascii character representationReturn ≦32 33H33H 4CH Registration method 44HParallel interface Parallel connector signal arrangement.The Specifications of this product .SpecificationsSpecification of control system connectors Button output・Do not supply more than AC/DC Connector for tally output Ex. When putting LED forward voltage 2V, maximum current isPlease use within 20mA when DC5V is used Please input as following timing Connector for parallel inputProblem Please check the following .Trouble shootingSound has noise 2006.4.14

KE811CT specifications

The Kowa KE811CT is a highly regarded model in the world of high-quality binoculars, renowned for its exceptional optical performance and rugged design. This model has been meticulously crafted to meet the needs of bird watchers, nature enthusiasts, and professionals who require reliable and high-resolution optics.

One of the standout features of the Kowa KE811CT is its impressive magnification and objective lens diameter. With an 8x magnification combined with a 42mm objective lens, these binoculars offer a bright and clear field of view. This specification enables users to observe distant subjects with precision while maintaining stability and minimizing hand-shake.

The KE811CT utilizes Kowa's proprietary XD (extra-low dispersion) glass, which significantly reduces chromatic aberration. This technology enhances color fidelity and sharpness, ensuring that images are vivid and life-like. The high-quality optics provide excellent light transmission, resulting in bright images even in low-light conditions such as dawn or dusk.

Another key characteristic of the Kowa KE811CT is its robust construction. These binoculars feature a waterproof and fog-proof design, making them suitable for outdoor use in various weather conditions. The rubber armor coating provides a secure grip and protects the binoculars from shock and impact. This rugged build ensures that the Kowa KE811CT can withstand the rigors of extensive field use.

In addition to its optical and structural features, the Kowa KE811CT offers a generous field of view, allowing for easy tracking of moving subjects. The close focus capability of this model enables users to observe detailed subjects at short distances, making it versatile for both bird watching and nature observation.

Furthermore, the eyecups are designed for maximum comfort and can accommodate users with or without glasses, enhancing usability for a wide range of audiences. Overall, the Kowa KE811CT is engineered to provide an exceptional viewing experience through its combination of advanced optics, rugged construction, and user-friendly design, making it a top choice for anyone seeking premium binocular performance in the field.