Kowa KE811CT Connector for tally output, Please use within 20mA when DC5V is used

Page 31

7-2-2. Connector for tally output

25

50

4 32 1 26

PARALLEL REMOTE

Connector pin No. 1-19 for output

Connector pin No. 21-25 for GND

Connector pin No. 26-30 DC5V

Output type : open-collector. Pullup (internal 10KΩ, 5V connection)

Rating : maximum 20mA, DC5V

◆Caution

Do not exceed the rating. Please put register ,R, to protect overcurrent as follows.

+5V

R(≧50Ω） R

2V

(Connection equipment)

MAX20mA

+5V

10kΩ

100Ω

(KE811CT)

(Ex.) When putting LED (forward voltage 2V), maximum current is

I＝ 5-2≦20mA , R+100

and then R≧50Ω .

◆Caution

Please use within 20mA when DC5V is used.

-25-

Image 31

Contents KE811CTw-type For U.S.A Usage Cautions Do not stick any foreign objects into the product Disconnect all cables before moving this product Index Terminal 6-pin ×2 Terminal 2-pin ×2 Main unit of KE811CTw-type AC adapter Power cordAbout this product KE811CTw-type Rack mounting kit ×2 Screw ×4：10 ～300m32.8 ～984.2ft After pressing SUB OUT button ． The name and function of each parts⑨ SERIAL3 ．Rear panel Connector for SUB OUTConnector These connectors are RJ-45 twisted pair connector for CAT5Corresponding to Input 1-4 at front panel Audio input connectorRCA connector for Screw for frame groundConnection …pair 1 3,6…pair 2 4,5…pair 3 7,8…pair Cables ConnectorCable mounting kit ．Component video ．Composite video．RGB video ．Audio Operation Setting of front dip switchOFF Setting of bottom dip switchPage Serial interface Connection of RS232C cable GNDRemark Page Ascii character representation Delimiter Character output line select command ReturnEx.5 Turning on of Power Ex.1 input IN2, output CAT533H Return ≦3233H 4CH Registration method 44H Parallel interface Parallel connector signal arrangement．The Specifications of this product ．SpecificationsButton output Specification of control system connectors・Do not supply more than AC/DC Ex. When putting LED forward voltage 2V, maximum current is Connector for tally outputPlease use within 20mA when DC5V is used Please input as following timing Connector for parallel inputProblem Please check the following ．Trouble shootingSound has noise 2006.4.14