a) When controlling this product by sending one control command.
This product can be controlled.
Please send control command in the following order. 1. Character (input line or action select command).
2. Delimiter.
3. Character (output line select command).
4. Return.
※ Set the front dip switch to Registration mode. Please refer to
(Ex.1) input : IN2, output : CAT5 | B | , | 1 | return |
ASCII character representation | ||||
HEX representation | 42H | 2CH | 31H | 0DH |
(Ex.2) input : IN6, output : SUB | F | , | 2 | return |
ASCII character representation | ||||
HEX representation | 46H | 2CH | 32H | 0DH |
(Ex.3) Turning OFF of CAT5OUT. | Q | , | 1 | return |
ASCII character representation | ||||
HEX representation | 51H | 2CH | 31H | 0DH |
(Ex.4) Turning OFF of SUBOUT. | Q | , | 2 | return |
ASCII character representation | ||||
HEX representation | 51H | 2CH | 32H | 0DH |
(Ex.5) Turning ON of POWER CONT. | , | 3 | return | |
ASCII character representation | J | |||
HEX representation | 4AH | 2CH | 33H | 0DH |
(Ex.6) Turing OFF of DISPLAY POWER (switching to CAT5 OUT). | ||||
ASCII character representation | I | , | 6 | return |
HEX representation | 49H | 2CH | 36H | 0DH |
(Ex.7) Turing ON of OPTION B. | L | , | 3 | return |
ASCII character representation | ||||
HEX representation | 4CH | 2CH | 33H | 0DH |
※This product sends, ACK (06H), as
This product sends, NAK (15H), as