12. OSD Select (Command2:l)
GTo select OSD (On Screen Display) on/off when con- trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off | 1 : OSD on |
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. External Control Mode (Command2:m)
GTo lock the front panel controls on the monitor and remote control. When setting this mode, only control the monitor with
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Lock off | 1 : Lock on |
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
*If you’re not using the remote control, use this mode. When main power is on/off, external control lock is released.
16. PIP Position (Command2:q)
GTo select sub picture position for PIP.
You can also adjust the sub picture position using PIP POSITION button on the remote control or in the screen menu.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0 : Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
17. Treble (Command2:r)
GTo adjust treble.
You can also adjust treble in the sound menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping1’. See page 28. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
14. PIP / Twin (DW) (Command2:n)
GTo control the PIP (Picture In picture)/Twin picture.
You can also control the PIP/TWIN picture using the PIP or Twin picture button on the remote control or in the screen menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data | 0: PIP/DW off | 3: DW2 | |
| 1: PIP (S) | 4: PIP (L) | |
| 2: DW1 |
|
|
Acknowledgement |
|
| |
|
|
|
|
[n][ | ][Set ID][ ][OK][Data][x] |
|
|
|
|
|
|
15. PIP Sound Select (Command2:p)
GTo select main or sub sound for PIP/Twin picture.
You can also adjust main or sub sound for PIP/Twin pic- ture using PIP SOUND button on the remote control or in the screen menu.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data 0: Main image sound 1: Sub image sound
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. Bass (Command2:s)
GTo adjust bass.
You can also adjust bass in the sound menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping1’. See page 28.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
19. Balance (Command2:t)
GTo adjust balance.
You can also adjust balance in the sound menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping1’. See page 28. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
27
