Troubleshooting Checklist
No picture &
No sound
Picture OK &
No sound
The remote control
doesn’t work
Picture appears slowly,
after switching on
No or Poor colour
or Poor picture
Horizontal/vertical bars
or picture shaking
No output from one of the
speakers
Unusual sound from
inside the monitor
•Check whether the Monitor is turned on.
•Power cord inserted into wall outlet?
•Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in.
•Press the VOLUME (G) button.
•Sound muted? Press MUTE button.
•Check to see if there is any object between the Plasma Display and the remote control causing obstruction.
•Check to see if the batteries are installed with the correct polarities. (Refer to p.11)
•Install new batteries. (Refer to p.11)
•This is normal as the image is muted during the startup process of the moni- tor. Please contact your service centre, if the picture has not appeared after five minutes.
•Select Colour in the Picture menu and press the VOLUME (G) button. (Refer to p.15)
•Keep a certain distance between the Monitor and the VCR.
•Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
•Check for local interference such as an electrical appliance or power tool.
•Adjust Balance in the Sound menu. (Refer to p.16)
•A change in ambient humidity or temperature may result in an unusual noise at the time of switching off or on of the monitor and does not indicate a fault with the monitor.
31
