LG Electronics MT-42PZ43B, MZ External Equipment Viewing Setups, How to connect, How to use

External Equipment Viewing Setups

Watching VCR (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-When connecting the Monitor to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white, Audio (R) -red).

-Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adaptor to the VIDEO INPUT on the Monitor.

-If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.

-If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

-Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR.

If a 4:3 picture format is used; the fixed image may remain visible on the screen.

-To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor

1.Use the INPUT SELECT button on the remote control to select Video or (AV1 or AV2). (If connected to S-VIDEO, select the S-Videoexternal input source.)

2.Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)

Watching Cable TV (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.

-For further information regarding cable TV service, contact your local cable TV service provider(s).

1.Use the INPUT SELECT button on the remote control and select Video or (AV1 or AV2).

2.Tune to cable service provided channels using the cable box.

Watching external AV source (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-When connecting the monitor to an external source, match the colours of AUDIO/VIDEO input jacks on the monitor with

the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

1.Use the INPUT SELECT button on the remote control to select Video or (AV1 or AV2).

2.Operate the corresponding external equipment. See external equipment operating guide.

Watching DVD (When the Interface board is installed.)	• Component Input ports
The interface board(AP-42EA40/41) is not equipped on MT/MZ-	You can get better picture quality if you con-
42PZ42/43 series models.	nect DVD player with component input ports
	as below.

How to connect
Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD
INPUT) and audio inputs to Audio sockets of AUDIO INPUT.	Component ports of the	Y	PB	PR
Or, connect the Euro scart socket of the VCR to the Euro scart socket	Monitor

of the set.

How to use

1.Turn on the DVD player, and insert a DVD.

2.Use INPUT SELECT button on the remote control to select Component or (AV1 or AV2). Refer to the DVD player's manual for operating instructions.

Video output ports of DVD player

Y Pb Pr

YB-Y R-Y Y Cb Cr

Y PB PR

8