Q-Logic ISR6142 manual Remotemap modify command example without SMART-WRITE licenses

4 – Command Reference Command Syntax

S

Please select a remote mapping from the list above ('q' to quit): 0

Smart-Write Compression (0=Enable, 1=Disable) [Disabled ] 1 Smart-Write Load Balance (0=Enable, 1=Disable) [Enabled ] 1

All attribute values for that have been changed will now be saved.

Remotemap modify command example without SMART-WRITE licenses:

QRouter (admin) #> remotemap mod

The following wizard will be used to modify various settings of a remote mapping. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

Index Local Device (WWPN)		Remote Device (WWPN)
----- -------------------		--------------------
0	21:20:00:d0:b2:02:86:d0	21:00:00:d0:b2:00:19:f0
1	21:21:00:d0:b2:02:86:d0	21:00:00:d0:b2:00:19:f0
2	21:20:00:d0:b2:02:86:d1	21:00:00:d0:b2:00:19:f0
3	21:21:00:d0:b2:02:86:d1	21:00:00:d0:b2:00:19:f0
4	21:20:00:d0:b2:02:86:d0	21:00:00:e0:8b:08:5f:3d

Please select a remote mapping from the list above ('q' to quit): 0

The SMART-WRITE feature license in not applicable for the selected mapping. Only mappings with the SMART-WRITE feature can be modified by this command.

Command aborted.

Remotemap remove command example:

QRouter (admin) #> remotemap rm

The following wizard will query for attributes before persisting and activating the updated mapping in the system configuration. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

Index Local Device (WWPN) Remote Device (WWPN)

----- ------------------- --------------------

0 21:00:00:e0:8b:08:5f:3d 22:00:00:14:c3:44:9a:fa

Please select a remote mapping from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved.

4-28 SN0054659-00 A