A
4 – Command Reference Command Syntax
Traceroute
Prints the route a network packet takes to the reach the destination specified by the user.
Authority | Admin session |
Syntax traceroute
Examples Traceroute command example:
QRouter (admin) #> traceroute
A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
IP Address (IPv4 or IPv6) | [0.0.0.0] 172.17.136.18 | |
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt | ] | |
Tracing route to 172.17.136.18 over a maximum of 30 hops:
1 | 172.17.136.18 | 2.3ms | 0.2ms | 0.2ms |
Traceroute completed in 1 hops.
