4 – Command Reference Command Syntax
S
Save
| Saves logs and traces. |
Authority | Admin session |
Syntax | save |
| capture |
| logs |
| traces |
Keywords | capture |
| Creates a debug file that captures all debug dump data. After the command |
| completes, you must ftp the debug capture file from the router. |
| logs |
| Creates a tar file containing the router’s log data, storing the file in the router’s |
| /var/ftp directory. After the command completes, you must ftp the log’s tar file |
| from the router. |
| traces |
| Creates a tar file containing the router’s dump data, storing the tar file in the |
| router’s /var/ftp directory. After the command completes, you must ftp the |
| trace’s tar file from the router. This command notifies you if the router does not |
| have any dump data. The system creates an event log entry whenever it |
| generates dump data. |
Examples | Save capture command example: |
| QRouter (admin) #> save capture |
| Debug capture completed. Package is System_Capture.tar.gz |
| Please use FTP to extract the file out from the System. |
| Save logs command example: |
| QRouter (admin) #> save logs |
| Save Event Logs completed. Package is Router_Evl.tar.gz |
| Please use FTP to extract the file out from the System. |