A
4 – Command Reference Command Syntax
All attribute values for that have been changed will now be saved.
Remotemap add command example without SMART-WRITE licenses:
QRouter (admin) #> remotemap add
The following wizard will create a mapping a device connected to the local system and a device connected to the selected remote peer system. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
Index (System Info, Mgmt IP Address)
-----
0
Please select a REMOTE system from the list above ('q' to quit) : 0 Index (WWNN,WWPN/iSCSI Name)
-----
0 20:20:00:d0:b2:02:86:d0,21:20:00:d0:b2:02:86:d0 (Init/Tgt)
1 20:21:00:d0:b2:02:86:d0,21:21:00:d0:b2:02:86:d0 (Init/Tgt)
2 20:20:00:d0:b2:02:86:d1,21:20:00:d0:b2:02:86:d1 (Init/Tgt)
3 20:21:00:d0:b2:02:86:d1,21:21:00:d0:b2:02:86:d1 (Init/Tgt)
Please select a LOCAL device from the list above ('q' to quit) : 0
Index (WWNN,WWPN/iSCSI | Name) |
| |
(Initiator) | |||
0 | 20:00:00:e0:8b:08:5f:3d,21:00:00:e0:8b:08:5f:3d | ||
1 | 20:00:00:d0:b2:00:19:f0,21:00:00:d0:b2:00:19:f0 | (Init/Tgt) | |
Please select a REMOTE | device from the list above | ('q' to quit) : 0 |
NOTE: Both the LOCAL and REMOTE systems do not have the
Remotemap modify command example with SMART-WRITE licenses:
QRouter (admin) #> remotemap mod
The following wizard will be used to modify various settings of a remote mapping. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
Index Local Device (WWPN) | Remote Device (WWPN) |
0 21:00:00:e0:8b:08:5f:3d | 22:00:00:20:37:fd:8a:b0 |