A
4 – Command Reference Command Syntax
Remote Peer
| Lets you assign a router peer to a local router, which can have up to four peers. |
Authority | Admin session |
Syntax | remotepeer |
| add |
| rm |
Keywords | add |
| Adds a peer router. |
| rm |
| Removes a peer router. |
Examples | Remotepeer add command example: |
| QRouter (admin) #> remotepeer add |
| A list of attributes with formatting and current values will follow. |
| Enter a new value or simply press the ENTER key to accept the current |
| value. If you wish to terminate this process before reaching the end |
| of the list press 'q' or 'Q' and the ENTER key to do so. |
| REMOTE MGMT port IP Address [0.0.0.0] 172.17.137.143 |
| Contacting REMOTE system (timeout=120 seconds) ... |
| <Admin> password of REMOTE system: ****** |
| <Admin> password confirmed. |
| Remote System Information |
| |
| Product Name |
| Symbolic Name |
| Serial Number 0608A00471 |
| HW Version 3 |
| SW Version 2.3.0.1 |
| No. of iSCSI Ports 2 |
| iSCSI Base Name |
| Mgmt IP Address 172.17.137.143 |
| iSCSI Port 1 IP Address 10.3.5.106 |
| iSCSI Port 1 TCP Port No. 3260 |
| iSCSI Port 2 IP Address 10.3.5.107 |
| iSCSI Port 2 TCP Port No. 3260 |
| Do you wish to create a connection with the REMOTE system (y/n): y |
| All attribute values for that have been changed will now be saved. |