A
4 – Command Reference Command Syntax
The selected target has not been presented on the port that was selected to be accessed the initiator. The following steps in the wizard will now setup the target so that it is presented on the port that will be used by the initiator. A default name for the presented target is assigned below. To accept the default assigned name simply press the ENTER key or enter a new name.
iSCSI presented target name
All attribute values for that have been changed will now be saved.
Localmap remove command example:
172.17.137.171 (admin) #> localmap rm
The following wizard will query for attributes before persisting and activating the updated mapping in the system configuration. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
020:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa
120:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7
220:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0
320:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d
420:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf
520:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86
620:00:00:14:c3:3d:cf:80,22:00:00:14:c3:3d:cf:80
720:00:00:14:c3:44:9a:f1,22:00:00:14:c3:44:9a:f1
820:00:00:14:c3:44:9b:0b,22:00:00:14:c3:44:9b:0b
920:00:00:14:c3:44:9b:7c,22:00:00:14:c3:44:9b:7c
Please select a Target from the list above ('q' to quit): 0 The following is a list of the initiators that have been mapped to the selected target and the port that was configured for the initiator to be presented on in order to access the target.
Target
Index Port Initiator (WWNN,WWPN/iSCSI Name)
-----
0 FC1
All attribute values for that have been changed will now be saved.