3 – Configuring CHAP
Normal
S
Normal Session—Bi-directional CHAP
To configure a
1.On the router:
a.Enable CHAP on the presented target to which the initiator will login.
b.Create a secret (for example, secret_target).
c.Use the set chap command.
2.Use the initiator add command to add the initiator that is about to do a normal login:
a.Enable the CHAP for this initiator.
b.Create a secret (for example, secret_initiator).
c.Use the set chap command to update the CHAP settings of the initiator.
3.Go to the MS Initiator and perform the following steps:
a.Click General.
b.Click Secret (in the middle of the screen).
c.If this is the first time you are setting secrets, reset all the secrets.
d.Type the secret (secret_target) that you created in Step 1.
4.Click Targets.
5.Select the target you want to login to.
6.Click Advanced.
7.Select Chap Login Information.
8.Type the secret (secret_initiator) that you created in Step 2 into Target Secret.
9.Select Mutual Authentication.
10.Click OK.
11.Click OK. The initiator completes the normal login.