Manuals / Q-Logic / Computer Equipment / Network Router

Q-Logic ISR6142 manual

Models: ISR6142

1 154

Download 154 pages 40.65 Kb

Page 117

Manual background

A

A – Log Messages Error Log Messages

323iSCSI Login PDU was received with a TSIH out of range. This would occur if the iSCSI initiator attempting the login failed to used the TSIH value provided in the Target Login Response PDU (router is target) in subsequent login PDUs.

324iSCSI Login PDU was received with an invalid TSIH value. The TSIH is invalid because there is no session with that TSIH value. This would occur if the iSCSI initiator attempting the login failed to used the TSIH value provided in the target login response PDU (router is target) in subsequent login PDUs.

393CHAP validation failed during login.

394Unexpected CHAP key.

548Failed to allocate an object for Set Port Info IOCTL processing:

PortType: 0 = FC, 1 = iSCSI

PortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2)

666Inquiry command failed. The Inquiry command was issued by the router as part of its discovery process.

669Pass-Through command for Inquiry command for page 83 failed. The Inquiry command was issued by the router as part of its discovery process.

675Pass-Through command for Read Capacity command failed. The Read Capacity command was issued by the router as part of its discovery process.

676Read Capacity command failed. The Read Capacity command was issued by the router as part of its discovery process.

736Pass-Through command issued by management application (such as Router Manager) was aborted.

740Pass-Through command issued by management application (such as Router Manager) failed due to invalid CDB length.

741Pass-Through command issued by management application (such as Router Manager) failed due to invalid data length.

757Pass-Through command issued by management application (such as Router Manager) was interrupted or timed out.

790 IOCTL operation unsupported. Operation code provided in log message.

808Report LUNs command failed. The Report LUNs command was issued by the router as part of its discovery process.

809Report LUNs command failed with check condition status. The Report LUNs command was issued by the router as part of its discovery process.

811 Failed to allocate LUN object: out of resources.

SN0054659-00 A

A-15

Image 117

Q-Logic ISR6142 manual

Contents

User’s Guide iSR6142 Command Line Interface CLIDocument Revision History ChangesSections Affected Configuring CHAP Command UsageCommand Reference IntroductionImage Initiator Localmap Logout Password Ping Quit Reboot Remote Map Simple Network Management Protocol SNMP Log MessagesList of Tables Index1 Introduction Intended AudienceRelated Materials Availability Technical SupportContact Information Trainingcalasupport@qlogic.com Latin and South America Region„ Working with SAN Router Configurations 2 Command UsageLogging On to a SAN Router „ Logging On to a SAN Router „ Guest AccountModifying a Configuration Working with SAN Router ConfigurationsSaving and Restoring Router Configurations Guest AccountSave Router Configuration and Persistence Restore Router Configuration and Persistence CHAP Definition 3 Configuring CHAP„ “Discovery Session-Bi-directional CHAP” on page „ “Discovery Session-Uni-directional CHAP” on page7. Click Advanced 8. Select Chap Login Information Discovery Session-Bi-directional CHAP10. Select Mutual Authentication 4. Click DiscoveryDiscovery Session-Uni-directional CHAP Normal Session-Bi-directional CHAP 6. Click Advanced 7. Select Chap Login Information9. Select Mutual Authentication Normal Session-Uni-directional CHAP SN0054659-00 A 3 - Configuring CHAP Normal Session-Uni-directional CHAPCommand Listing 4 Command ReferenceTable 4-1. CLI Commands A B C D F H I L P Q R S Set Show TTable 4-2. Command Line Completion Command SyntaxKeystroke EffectAuthority AdminSyntax KeywordsAuthority BeaconSyntax KeywordsAuthority ClearSyntax KeywordsDate Syntax dateKeywords MMDDhhmmCCYY Keywords add FcipRouteFCIP route modify command example FCIP route remove command example Syntax fru Keywords restoreAuthority HelpSyntax Examplesmemory mgmt ntp Authority None Syntax History HistoryImage Keywords cleanupSyntax image AuthorityAuthority InitiatorSyntax KeywordsInitiator remove command example Authority LocalmapSyntax KeywordsLocalmap add command example without FC port query Localmap remove command example Authority None Keywords logout Logoutpassword PasswordAuthority SyntaxSyntax ping PingExamples Ping command example AuthorityAuthority None Syntax quit Quitreboot RebootAuthority SyntaxAuthority Remote MapSyntax KeywordsRemotemap add command example with SMART-WRITE licenses Remotemap modify command example with SMART-WRITE licenses Remotemap add command example without SMART-WRITE licensesRemotemap remove command example Remotemap modify command example without SMART-WRITE licensesAuthority Remote PeerSyntax KeywordsRemotepeer remove command example Admin session Reset Factoryreset factory Reset factory command exampleAuthority SaveSyntax KeywordsSave traces command examples Keywords chap Syntax setfeatures Authoritysystem Sets system parameters such as symbolic name and log levelQRouter admin # set chap Set CHAPAuthority SyntaxAuthority Set FCSyntax Keywordsset features Set FeaturesAuthority SyntaxAuthority Set iSCSISyntax KeywordsIPv6 Tgt TCP Port No. Min=1024, Max=65535 Authority Set iSNSSyntax KeywordsAuthority Set MgmtSyntax ExamplesAuthority Set NTPSyntax ExamplesSet Properties AuthoritySyntax set properties Authority Set SNMPSyntax Keywords4 - Command Reference Command Syntax 4-46SN0054659-00 A Authority Set SystemSyntax ExamplesShow Authority None Syntax show chapKeywords chap Displays SCSI initiator information iSCSI or FC Displays targets discovered by the router FC, iSCSI, or both Displays the router statistics, both FC and iSCSIAuthority None Show CHAPSyntax show chapAuthority Show FCSyntax KeywordsAuthority Show FcipRoutesSyntax KeywordsShow Features Syntax show featuresAuthority None Keywords fc Show InitiatorsQRouter admin # show iscsi Show iSCSIAuthority Syntax4 - Command Reference Command Syntax SN0054659-00 A4-57 Authority Show iSNSSyntax KeywordsShow Localmaps Authority NoneSyntax show localmaps Authority None Show LogsSyntax show logsShow Memory Authority NoneSyntax show memory Authority None Show MgmtSyntax show mgmtAuthority None Show NTPSyntax show ntpKeywords byte Show PerformanceAuthority None Syntax show perf byte initrbyte initwbyte tgtrbyte tgtwbyteShow Performance byte command example Displaying bytes/sec totalPress any key to stop display Show Presented Initiators Authority NoneSyntax show presentedinitiators Keywords fc Show Presented TargetsShow Presented iSCSI Targets command example Show Properties Authority NoneSyntax show properties Show Remotemaps Authority NoneSyntax show remotemaps Show Remotepeers Authority NoneSyntax show remotepeers Authority None Show SNMPSyntax show snmpAuthority None Show StatsSyntax show statsData Bytes Xmited 55036896842234 PDUs Rcvd Unexpected I/O Rcvd iSCSI Format Errors Header Digest Errors Authority Show SystemSyntax show systemAuthority Show TargetsSyntax KeywordsAuthority Show VLANSyntax KeywordsAuthority Admin session Syntax shutdown ShutdownAuthority TargetSyntax KeywordsTraceroute AuthoritySyntax traceroute 4 - Command Reference Command Syntax 4-82SN0054659-00 A Log Data A Log MessagesInformational Log Messages „ “Application Modules” on page A-2 „ “iSCSI Driver” on page A-4Application Modules Table A-1. Application Modules-Informational Log MessagesLog Message Log Message Table A-1. Application Modules-Informational Log Messages ContinuediSCSI Driver Table A-2. iSCSI Driver-Informational Log MessagesLog Message Fibre Channel Driver Table A-3. Fibre Channel Driver-Informational Log MessagesLog Message User Modules Table A-4. User Modules-Informational Log MessagesLog Message Log Message Table A-4. User Modules-Informational Log Messages ContinuedFCIP Table A-5. FCIP-Informational Log MessagesLog Message System TOE DriverTable A-6. TOE-Informational Log Messages Table A-7. System-Informational Log MessagesTable A-8. Application Module-Error Log Messages Error Log Messages„ “Application Modules” on page A-10 „ “iSCSI Driver” on page A-18 „ “Fibre Channel Driver” on page A-20 „ “User Modules” on page A-22Log Message Table A-8. Application Module-Error Log Messages ContinuedLog Message Table A-8. Application Module-Error Log Messages ContinuedLog Message Table A-8. Application Module-Error Log Messages ContinuedPage Page Page Page Table A-9. iSCSI Driver-Error Log Messages iSCSI DriverLog Message Page Table A-10. Fibre Channel Driver-Error Log Messages Log MessagesFibre Channel Driver Log Messages Table A-10. Fibre Channel Driver-Error Log Messages ContinuedTable A-11. User Modules-Error Log Messages User ModulesLog Message Log Message Table A-11. User Modules-Error Log Messages ContinuedPage Fatal Log Messages Table A-12. System-Error Log Messages„ “iSCSI Driver” on page A-25 „ “FC Driver” on page A-28 „ “TOE Driver” on page A-30 „ “System” on page A-31Log Message Table A-13. iSCSI Driver-Fatal Log Messages ContinuedLog Message Table A-13. iSCSI Driver-Fatal Log Messages ContinuedFC Driver Table A-14. Fibre Channel Driver-Fatal Log MessagesLog Message Log Message Table A-14. Fibre Channel Driver-Fatal Log Messages ContinuedTable A-15. TOE-Fatal Log Messages TOE DriverLog Message Table A-16. System-Fatal Log Messages SystemLog Message A - Log Messages Fatal Log Messages A-32SN0054659-00 A Introduction B Simple Network Management Protocol SNMPSNMP Properties Table B-1. SNMP PropertiesTable B-2. SNMP Trap Configuration Parameters SNMP Trap ConfigurationTable B-1. SNMP Properties Continued ParameterSystem Information Management Information Base MIB„ System Information „ Network Port Table „ Fibre Channel Port Table „ Fibre Channel Port TableQsrNwPortEntry Network Port TableqsrNoOfGbEPorts qsrAgentVersionqsrNwPortIndex qsrNwPortRoleqsrNwPortAddressMode qsrIPAddressTypeqsrNetMask Fibre Channel Port TableqsrGateway qsrMacAddressQsrFcPortEntry qsrFcPortEntryqsrFcPortRole qsrFcPortIndexqsrFcPortWwn Sensor TableqsrFcPortId qsrFcPortTypeQsrSensorEntry qsrSensorEntryA sensor entry consists of the following sequence of objects qsrSensorTypeqsrUpperThreshold qsrSensorValueqsrLowerThreshold qsrSensorStateNotification Objects Notifications„ Notification Objects „ Agent Start Up Notification „ Agent Shut Down Notification „ Network Port Down NotificationAgent Shut Down Notification Agent Start Up NotificationNetwork Port Down Notification Fibre Channel Port Down NotificationGeneric Notification Sensor NotificationB - Simple Network Management Protocol SNMP Notifications B-14SN0054659-00 A Index Page Page Page error log messages A-22 messages A-6 Uni-directional CHAP configuration 3-3, 3-5 User modulesiSR6142 Command Line Interface CLI User’s Guide Index-6SN0054659-00 A