A
4 – Command Reference Command Syntax
Show FcipRoutes
Displays FCIP route(s) configuration parameters.
Authority | None |
|
Syntax | show fciproutes [link_id] |
|
Keywords | [link_id] |
|
| Specifies the number of the FCIP route to be displayed (1 or 2). | |
Examples Show FCIP routes command example: |
| |
| QRouter (admin) #> show fciproutes |
|
| FCIP Route Information |
|
|
| |
| FCIP Route | 1 |
| FCIP Interfaces Status | Enabled |
| FCIP Link Status | Down |
| FC Port | FC1 |
| GE Port | GE1 |
| GE Link Status | Up |
| IPv6 Link Local | fe80::2c0:ddff:fe0c:8be2 |
| IPv6 Remote Address | fe80::21b:21ff:fe06:d517 |
| MTU Size | Normal |
| TCP Window Size | 32768 |
| Window Scaling | Disabled |
| TCP Port No | 3225 |
| GE Port Speed | Auto |
| FCIP Time Stamp | Enabled |
| Error Detect TimeOut | 1 |
| Resource Allocate TimeOut | 1 |
| Bandwidth, Mbit/sec | 1000 |
| VLAN | Disabled |
| FCIP SW Compression | Disabled |