A
4 – Command Reference Command Syntax
Set iSNS
| Configures iSNS parameters for an iSCSI port. |
| |
Authority | Admin session |
|
|
Syntax | set isns [port_num] |
|
|
Keywords | [port_num] |
|
|
| Specifies the number of the iSCSI port to be configured for iSNS. | ||
Examples | Set iSNS command example: |
|
|
| QRouter (admin) #> set isns 1 |
|
|
| A list of attributes with formatting and current values will follow. | ||
| Enter a new value or simply press the ENTER key to accept the current | ||
| value. If you wish to terminate this process before reaching the end | ||
| of the list press 'q' or 'Q' and the ENTER key to do so. | ||
| Configuring iSNS iSCSI Port: | 1 |
|
|
| ||
| iSNS (0=Enable, 1=Disable) | [Disabled | ] 0 |
| iSNS Address (IPv4 or IPv6) | [0.0.0.0 | ] |
| fe80::21b:21ff:fe06:d517 |
|
|
| TCP Port No. | [3205 | ] |
All attribute values for Port 1 that have been changed will now be saved.
