A – Log Messages Error Log Messages
S
7NULL doorbell routine for unloaded drivers. When a driver is unloaded, the doorbell routine is redirected to this NULL routine.
36Processing unsupported ordered tag task management command.
44Processing unsupported
98Unable to create an object for the target device: exceeded the maximum number of target devices.
100Unable to create an object for the target node: exceeded the maximum number of target devices.
107 Memory unavailable for LUN object.
117Unable to create an object for initiator object: exceeded the maximum number of initiators.
136Process control block status indicates that a PCI error occurred during a target operation.
146Process control block status indicates that a DMA error occurred during an initiator operation.
147Process control block status indicates that a transport error (protocol) occurred during an initiator operation.
151Process control block status indicates that a data overrun error occurred during an initiator operation.
274iSCSI login failed between receipt of PDU and request for the data segment.
278iSCSI login failed due to unsupported version number in received login PDU.
297iSCSI Login PDU contains invalid initiator name. The format and character set used to form the initiator name is invalid.
305iSCSI target login was attempted to a portal (iSCSI1 or iSCSI2) on which the target is not presented.
307iSCSI Login PDU received for a target with a target name unknown to the router.
308iSCSI Login PDU received without a target name for a normal session.
310iSCSI Login PDU received without an initiator name key/value.
312iSCSI Login PDU received with an incorrect initiator task tag for a session which is partially logged in. This would occur if a login PDU other than the initial login PDU used an initiator task tag which was different than the initiator task tag provided in the initial login PDU.
