4 – Command Reference Command Syntax
S
Target
| Removes targets from the router’s database. Typically, you can use this command |
| to remove targets from the database that are no longer connected to the router. |
| NOTE: |
| The target add command is not currently supported. |
Authority | Admin session |
Syntax | target |
| add |
| rm |
Keywords | add |
| Not supported. |
| rm |
| Removes a target from the router’s target database. |
Examples | Target add command example: |
| QRouter (admin) #> target add |
| Command 'target add' is currently not supported. |
| Target rm (remove) command example: |
| QRouter (admin) #> target rm |
| Index (WWNN,WWPN/iSCSI Name) |
| |
| 0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b6:1f:fa |
| Please select an 'OFFLINE' Target from the list above ('q' to quit): q |
| Command aborted. |