MeshDynamics 4000 Series APs
Initial Configuration Settings
Network Management System (NMS) is required to configure the access point.
1.Download http://www.meshdynamics.com/downloads/MDNetworkView er82.exe from www.meshdynamics.com
2.The NMS must run from a machine on the same network.
3.The NMS requires Java 1.4 Runtime Environment to be installed. This may be downloaded from: http://java.sun.com/j2se/1.4.2/download.html
4.Click the J2SE v 1.4.2_05 JRE link.
5.After the software is downloaded to the machine, click
Meshviewer.exe.
6.Click the green Start button to start seeing the access points in NMS.
7.
IP Address is not required to configure the access point.
PN: | 5 |
