Philips IPF525 Telephone Lines and Additional Devices, Configuring Telephone Lines and Services

10 Telephone Lines and Additional Devices

Configuring Telephone Lines and Services

DSL Connection

In the event that you use a DSL modem: Connect the device to the slot intended for analogue telephones/fax machines! For additional information, please consult the operating manual of your DSL system. Ask your telephone or internet service provider if necessary.

Voice-Mailbox

(IPF¦525, IPF¦555)

You cannot simultaneously use the answering machine facility of your telephone service provider (= voice-mail box) and receive faxes on your devices. Get the mail-box function for your telephone connection disabled or set the number of rings for the fax switch to less than 5. When the fax switch accepts the call, the mail-box of the service pro- vider does not step in. Contact your telephone service pro- vider (also see Chapters "Settings/Setting the Fax Switch").

EN

ISDN Connection

Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and therefore it cannot be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for analogue terminals. Details for ISDN connections can be found in the instructions provided with the terminal adapter or the dial-up router.

Selecting the Dialling Process

In some countries you can set the dialling process to pulse dialling (IWV) or tone dialling (MFV, DTMF tones).

Notice

Tone Dialling Disabled

Use pulse dialling (IWV), only if the tone dial- ling process (MFV) is disabled for your link.

1Press MENU. RECEPT. SET-UPappears on the display.

2Select using [ INSTALLATION.

3Confirm with o. STATION NAME appears on the display.

4Select using [ TEL.LINE SETUP.

5Confirm with o. LINE TYPE appears on the display.

6Select using [ DIAL MODE.

7Confirm with o.

8Use [ to select the desired dialling process.

9Confirm with o.

Voice-Mailbox

(IPF¦520)

You cannot simultaneously use the answering machine facility of your telephone service provider (= voice-mail box) and receive faxes on your devices. Get the mailbox function for your telephone connection deactivated. When the fax switch accepts the call, the mail-box of the service provider does not step in. Enquire with your telephone service provider.

PABX Systems

Private branch exchanges (PABX) are typical in many offices and some households. You must dial an outside line access code in order to get a connection to the public tele- phone network (PSTN) from a PABX.

Notice

Additional Telephone No Extension

An additional telephone connected to the device on a telephone socket is not considered an exten- sion.

1Press MENU. RECEPT. SET-UPappears on the display.

2Select using [ INSTALLATION.

3Confirm with o. STATION NAME appears on the display.

4Select using [ TEL.LINE SETUP.

5Confirm with o. LINE TYPE appears on the display.

6Confirm with o. The display shows e.g.: PUB- LIC(PSTN).

7Select using [ PRIVATE(PBX).

8Confirm with o.

9Confirm with o.

10 You can exit with j.

The device is now setup for the PABX operation. You must enter the outside line access code for the connection to the public telephone network. This is mostly 0.

Notice

Incorrect Outside Line Access Code

For older telephone systems, the outside line access code can be R (= FLASH). Read how to switch this function on in the next section. If the connection to the public telephone network is not possible, contact your telephone system sup- plier.

Telephone Lines and Additional Devices · Configuring Telephone Lines and Services 33