SMS ยท Composing SMS 25
EN

Replying an SMS

You can add text to a received SMS and reply to the sender.
1For the relevant SMS, press o.
2Select using [ ANSWER.
3Confirm with o.
4You can modify the message, or add text to it.
5Confirm with o.
6Using [ select YES to transmit the SMS or NO to edit
the SMS.
7Confirm with o. The SMS is sent back to the sender.
Composing SMS
You can enter and save SMSs without sending them. These
SMSs are saved as SMS WRITTEN. You can save up to five
SMS WRITTEN.
1Press _.
2Using [ select WRITE SMS.
3Confirm with o.
4You can enter characters using the numeric keys (see
button labels).
5Confirm with o. The SMS is saved.
Printing SMSs
1Press _.
2Using [ select SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3Confirm with o.
4Select using [ DISPLAY LIST.
5Confirm with o.
6Using [ select the SMS that you would like to print.
7Confirm with o.
8Select using [ PRINT.
9Confirm with o. The selected SMS is printed.
Print list of all SMS messages ljet 3
Deleting SMS
SMS Deletion Introduction
If the message memory is full, the device cannot receive
any more messages. Delete SMS messages to free up mem-
ory.
Your device can save 30 received SMSs, 5 composed and
sent SMSs and 5 templates, which are not yet sent.
1Press _.
2Using [ select SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3Confirm with o.
4Using [ select DISPLAY LIST.
5Confirm with o.
6Using [ select the SMS that you would like to delete.
7Confirm with o.
8Using [ select DELETE.
9Confirm with o. The selected SMS is deleted.
Modifying the Settings

Changing Transmitting and

Receiving Numbers

All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another tele-
phone service provider, you must change these numbers.
1Press _.
2Using [ select CONFIGURATION.
3Confirm with o.
4Select using [ SERV.CENTRE NO..
5Confirm with o.
6Select using [ TX SERV. CENTRE.
7Enter the number for sending SMS messages.
8Confirm with o.
9Select using [ RX SERV. CENTRE.
10Enter the number for receiving SMS messages.
11Confirm with o.
12You can exit with j.

Switching off Audio Signal for SMS

Reception

The reception of an SMS is indicated by a notification
tone. You can switch this notification tone off.
1Press _.
2Using [ select CONFIGURATION.
3Confirm with o.
4Using [ select SMS RX ADVICE.
5Confirm with o.
6Using [ select whether notification tone for the
reception of SMS is to be on or not.
7Confirm with o.
8You can exit with j.
Notice
You can enter special characters using 0.
Enter special characters using * or #.
Using f x switch the input area between
small and capital letters.
You can move the cursor using u.
Use C to delete individual characters.
Press and hold C (at least two seconds) to
delete the entire text.
Notice
You can print a list of all SMS messages in the
selected folder, if you select PRINT LIST
instead of DISPLAY LIST using [.