Kowa KE811CT instruction manual Specification of control system connectors, Button output

Page 30

7-2. The specification of control system connectors

7-2-1.Contact output connectors for power control (POWER CONT) and option (OPTION A-F)

button output

POWER

OPTION OUT

CONT

A

B

C

D

E

F

Relay specification

relay (no polarity)

relay (no polarity)

Relay type : photo MOS relay, make contact

Rating : maximum 50mA, less than AC/DC 24V

Internal circuit is as follows.

fuse

varistor

◆Caution

・Do not supply more than AC/DC 24V.

※ When option button is set as momentary output, output pulse width is about 200msec.

-24-

Image 30

Contents KE811CTw-type For U.S.A Usage Cautions Do not stick any foreign objects into the product Disconnect all cables before moving this product Index Rack mounting kit ×2 Screw ×4 Main unit of KE811CTw-type AC adapter Power cordAbout this product KE811CTw-type Terminal 6-pin ×2 Terminal 2-pin ×2：10 ～300m32.8 ～984.2ft ． The name and function of each parts After pressing SUB OUT button⑨ SERIAL3 RJ-45 twisted pair connector for CAT5 Connector for SUB OUTConnector These connectors are ．Rear panelScrew for frame ground Audio input connectorRCA connector for Corresponding to Input 1-4 at front panelConnection Cables Connector …pair 1 3,6…pair 2 4,5…pair 3 7,8…pairCable mounting kit ．Composite video ．Component video．RGB video ．Audio Setting of front dip switch OperationSetting of bottom dip switch OFFPage Serial interface GND Connection of RS232C cableRemark Page Ex.1 input IN2, output CAT5 Delimiter Character output line select command ReturnEx.5 Turning on of Power Ascii character representationReturn ≦32 33H33H 4CH 44H Registration methodParallel connector signal arrangement Parallel interface．Specifications ．The Specifications of this productSpecification of control system connectors Button output・Do not supply more than AC/DC Connector for tally output Ex. When putting LED forward voltage 2V, maximum current isPlease use within 20mA when DC5V is used Connector for parallel input Please input as following timing．Trouble shooting Problem Please check the followingSound has noise 2006.4.14