Network Address Translation capability between LAN and multiple WAN connections, and the LAN traffic is routed to appropriate WAN connections based on the destination IP addresses and Route Table. This eliminates the need for the static NAT session
configuration between multiple LAN clients and multiple WAN connections. When the Dynamic NAPT is chosen, there is no need to configure the NAT Session and
NAT Session Name Configuration.
The 
option maps the single WAN IP addresses to many local PCs IP addresses.(1xN). It is the
to add the session name for WAN interface.
This field allows the user to select the session from the configured NAT Session Name Configuration.
This filed allows the user to assign the IP address to map the corresponding NAT/NAPT sessions.
will be displayed at the middle of this page to