Lantronix A104 manual

Network Interface, then that Gateway’s IP address appears in the Gateway field of the route entry

If the selected Network Interface is dynamic but the connection is not established, then the route entry does not appear in the Routing Table. When the interface comes up later, the route entry is then added.

The system-wide Default Gateway now provides three options: Auto, User-selected Network Interface, and None.

This field allows the user to choose to have no Default Gateway in the CPE

This field allows the user to select the CPE to automatically decide the Default Gateway.

This field allows user to select a Network Interface from a list (PVCs, PPP Sessions, USB and LAN). This option lets the user to associate the system-wide Default Gateway to a Network Interface, static or dynamic, and provides a way to fix the Default Gateway to a dynamic Network Interface before the interface is established.

This field allows the user to enter the remote network or host IP address for the static routing.

This field allows the user to enter the Subnet Mask for the static routing.

This field allows the user to enter the IP address of the gateway device that allows the router to contact the remote network or the host for Specified IP or select an Interface for the Gateway.

This field displays the static route entries entered by the user.

The page shows the current learned Bridge MAC table.