modem and the ADSL network through a
This section describes how to connect and configure the ADSL router.
Connect the router directly to the wall jack using the included ADSL cable.
There are two methods to connect the router and workstation. The one use the crossover Ethernet cable to connect directly between them. The other use straight Ethernet cable to connect router with hub (or switch), then go to the workstation.
Connect the power adapter to the port labeled POWER on the rear panel of router.
The procedure for connecting cables differs depending on whether or not your telephone equipment is connected to a POTS splitter.
(ADSL over POTS)
A POTS splitter separates data signals from voice signals on your telephone line. The POTS splitter works by running a separate data line from the voice line, so that the ADSL router has a dedicated cable for data transmission.