LevelOne GSW-2490TXM manual Switch Port Configuration

Page 38

Switch Port Configuration

Figure 4-11. The Port Administration in Switch Port Configuration Menu

The Ports (24+2) of the system are divided and displayed in three separated pages. In the port Administration menu, select a port that you can configure the common characteristics such as speed negotiation, flow control, and VLAN ID as well as the following special features provided with the system:

•Per-Port Priority – Four levels of priority (High, Medium, Low and Lowest) can be set to each individual port. However, the priority level set through QoS / Type of Service configuration in the device configuration menu will have higher precedence.

•Local IP Forwarding – A policy instrument that provides a way for local IP traffic to cross the local VLAN boundary set force in a typical (secure) access environment.

•Bandwidth provisioning - 8 levels of speed control facilitate the provisioning control for access provider.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents LevelOne Features Gbic SCPackage Contents Snmp Network Management Management MethodsConsole and Telnet Management 10/100Base-TX RJ-45 ports Auto MDI/MDIX Hardware DescriptionFront Panel Console Port LED IndicatorsExpansion Slots Rear Panel Power OnDiagnostic Test Connecting to the Network Pre-Installation RequirementsMounting the Switch Desktop MountingRack-mounted Installation Attach mounting brackets with screwsConnecting to the Switch Login in the Console Interface Settings of communication parametersMain Menu System InformationManagement Setup Network ConfigurationSerial Port Configuration Snmp Community SetupManagement Capability Setup Trap ReceiverTrap Filter Setup 13. The Management Capability setup MenuSwitch Device Configuration Device Control MenuSwitch Port Configuration Permanent Address ConfigurationPort Statistics Static Unicast Address ConfigurationStatic Multicast Address Configuration Spanning Tree Protocol Configuration 19. The Port Statistics menuSpanning Tree Protocol Port Configuration Post-Based Vlan Configuration1Q Vlan Configuration 1 .1Q Vlan Configuration23. The Port Based Vlan Configuration menu Dynamic Vlan TableVlan Untagged Configuration Garp Configuration26. The Garp Configuration menu MTU/MDU Per-Port Vlan TableTrunk Group Configuration Igmp Snooping TablePort Mirroring Configuration 29. The Trunk Configuration MenuUser Authentication 31. The User Authentication MenuSystem Utility System Restart Factory ResetLogin Timeout Interval Web-Based Management System DownloadSystem Login About Web-based ManagementManagement Setup System InformationSerial Port Configuration Menu Snmp Community Setup Menu Management Capability Setup Menu Switch Configuration Device ControlSwitch Port Configuration 12. The Trunk Group in Switch Port Configuration Menu Page 16. The Spanning Tree Protocol Configuration upper Menu 17. The Spanning Tree Protocol Configuration lower Menu Vlan Configuration 19. The Spanning Tree Protocol Port Configuration lower Menu21. The Static Vlan Configuration Menu 23. The Untagged Configuration Menu Igmp Configuration User Authentication 27. The Igmp Configuration MenuSystem Utility 29. The System Restart MenuUpdate Setting 31. The Login Timeout Interval MenuNetwork Configuration Collapsed Backbone Application Departmental Bridge Collapsed Backbone ApplicationHigh Performance Switched Workgroup Departmental Bridge ApplicationIeee 802.1Q Vlan Application Port-based Vlan WorkgroupShared Server Product Specifications MAC Address
Top Page Image Contents