Adcom GFR-700HD Pro Logic IIx/Neo 6 Configuration, Plii Music Config Center Width, Setup

Chapter 3 - Setup

Pro Logic IIx/Neo:6 Configuration

The GFR-700HD makes the most of your incoming stereo signals. With the built-in Dolby Pro Logic IIx and DTS Neo:6 decoders, not only can you slice, dice, and expertly distribute a stereo signal to seven or more speakers, you can even fine-tune the imaging and depth of the sound field specifically for music sources.

To access the Pro Logic IIx/Neo:6 configuration menu:

1Press the Main button on the remote control.

2 Press the Setup button.

3 Use the / buttons to select PLII/NEO:6 CON- FIG, then press the Select button.

4 Use the / buttons to choose from the follow- ing menu items:

PLII MUSIC CONFIG (CENTER WIDTH)

While listening in Dolby Pro Logic IIx Music mode, ad- justs the width of the center channel. Use the / buttons to select:

•+0 (narrowest) to +7 (widest)

•The default is 3.

PLII MUSIC CONFIG (DIMENSION)

While listening in Dolby Pro Logic IIx Music mode, adjusts the dimensions of the sound field. Use the / buttons to select:

•-3 (most distant) to +3 (farthest forward)

•The default is 0.

NEO:6 MUSIC CONFIG (CENTER IMAGE)

While listening in Neo:6 Music mode, adjusts the prominence of the center channel to create a wider stereo effect with vocals. Use the / buttons to select:

•+0 (no effect) to +5 (most prominence given to center channel)

•The default is 3.

Note:

•The ProLogic IIx configuration settings apply to both ProLogic II and ProLogic IIx surround modes; see page 57.

40GFR-700HD Owner’s Manual