Adcom GFR-700HD user manual Front Panel Overview

Front Panel Overview

The following is an overview of the GFR-700HD front panel.

1	Standby button	7	Ext 7.1 button
	Powers the GFR-700HD on/off (Standby mode).		Selects the Ext 7.1 inputs, usually connected to
	• The rear panel power switch must be on		a DVD, DVD-Audio, or SACD player.
	(1) for this button to function.	8	Surr Mode button
	• The Power LED glows amber in Standby
	mode and red in On mode.		Steps through all available surround modes
2	Room Two On/Off button		(e.g., Dolby Digital, DTS, etc.) for the selected
			input.
	Activates the GFR-700HD’s Zone 2 outputs,		• Your selection will override the default
	usually connected to an amplifier/receiver in a		surround mode for the input.
	second room.	9	FM/AM button
3	Room Two Setup button
			Selects Tuner mode. Press repeatedly to switch
	Displays the Zone 2 configuration menu.		between the FM and AM tuner bands.
	• Press repeatedly to step through the Room	10	Tune/Preset button
	2 menu options and use the Volume knob
	to make selections.		In Tuner mode, switches between manual and
4	Video 1~4 buttons		preset tuning.
		11	Front panel display
	Selects the Video 1~4 inputs.
	• Selecting an input activates its audio, vid-		Displays GFR-700HD menus and status informa-
	eo, and configuration settings.		tion (see page 12).
5	Tape button	12	Up/Down buttons
	Monitors the Tape output, usually connected to		In Tuner mode, selects stored presets or manu-
	a recording device (e.g., a VCR or tape deck).		ally scans the selected tuner band.
6	CD button	13	Volume knob
	Selects the CD input, usually connected to a		Adjusts the volume level for the selected input.
	CD player.
www.adcom.com			GFR-700HD Owner’s Manual	7

Chapter 1 - Welcome