Chapter 4 - Operations
Other Surround Modes
7.1 m2
Uses an
•Your source component is connected to the ana- log or digital audio inputs.
•Your source audio is in
•You have seven speakers plus a subwoofer.
STEREO
Passes an incoming or downmixed stereo signal to the front speakers. Use if:
•Your source component is connected to an ana- log or digital audio input.
•Your source audio is in
•You have at least two speakers (LF/RF), or would simply prefer to listen to a
HALL
Creates a hall or amphitheater effect from an incom- ing or downmixed stereo signal. Use if:
•Your source component is connected to an ana- log or digital audio input.
•Your source audio is in
•You have at least two speakers (LF/RF), or would simply prefer to listen to a
5-STEREO
Generates maximum output for a five speaker sys- tem. The rear speakers are driven with the same signal as the front left and right, while the center speaker is a monophonic summation of the front speakers. Use if:
•Your source component is connected to an ana- log or digital audio input.
•Your source audio is in
•You have at at least five speakers (LF/RF, C, LS/ RS).
Tone Control
Manual Bass/Treble Control
Follow these steps to make Bass/Treble adjustments on the fly:
•Press the Bypass button on the remote control to toggle Tone Control on.
•Use the Bass and Treble buttons to bring up the tone adjustment
•Use the / buttons to set the desired level.
Notes:
•The tone adjustment
•Tone controls are not available in the Dolby
Digital EX,
