LaCie d2 DVD±RW Drive | Getting Connected | |
User Manual | page 18 | |
|
|
|
2.2. Connecting the Power Supply
The power supply kit is composed of two cables: one cable (A) connects to the LaCie drive; and the other cable (B) connects to a power outlet, such as a wall out- let or a surge protector.
A
B
XXXXXX
| LaCie Ltd. |
|
| Serial Numbe | r XXXXXXXXX |
OFF | ON |
|
C
1.Connect Cable A to your LaCie Drive.
2.Connect Cable B to the power supply brick (C).
3.Connect Cable B to a surge protector or wall outlet.
CAUTION:
❖Only use the AC adapter supplied with your spe- cific LaCie drive. Do not use a power supply from another LaCie drive or another manufacturer. Us- ing any other power cable or power supply may cause damage to the device and void your war- ranty.
❖Always remove the AC adapter before trans- porting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty.
❖If your power supply gets damaged, a re- placement can be purchased from your lo- cal LaCie retailer or on the LaCie Web site:
www.lacie.com