LaCie 400USB Connecting the USB 2.0 Cable, More Info. This will open theApple System Profiler

LaCie d2 DVD±RW Drive	Getting Connected
User Manual	page 19

2.3. Connecting the USB 2.0 Cable

1.Connect the power supply cable (see section 2.2).

2.Connect the Hi-Speed USB 2.0 cable to the USB 2.0 port on the back of the drive (Fig. 2.3.A).

3. Attach the other end of the interface cable to an

available USB port on your computer (Fig. 2.3B).

4.Your drive should now be ready for use. To verify that your drive is correctly installed and communi- cating with your computer, follow these steps:

Mac Users
In the Apple menu, click on About This Mac, then	Fig. 2.3.A
More Info. This will open theApple System Profiler.
Your drive should be listed under the Hardware cat-
egory.

Windows Users

Right click your My Computer folder and select Properties. Click on General. Your drive should be listed.

LaCie Ltd. XXXXXX

Serial Number XXXXXXXXX

OFF ON

Fig. 2.3.B

Technical note: Your drive must be con- nected to a USB 2.0 (as opposed to USB 1.1) port. See section 1.4, Cables and Connections.

Technical note: For more information on USB connections, see the following sections:

❖1.4, Cables and Connections

❖4.6, USB Questions and Answers