Korg KTV1 owner manual Basic operation Playback, Turning the power on/off, Power, Monitors

Page 14

Basic operation — Playback

1. Turning the power on/off

Power

To turn the power on

1Connect the AC adapter, your input devices, and your output devices.

2Press the power switch to turn the power on.

After a few moments, the VALUE display will indicate the currently selected style and bank.

NOTE You can specify the bank and style number that will be selected when the power is turned on. (☞ p.28)

To turn the power off

To turn the power off, press the NO/ESC key several times until the BUSY indicator goes dark; then press the power switch to turn it off.

NOTE Never turn off the power while the BUSY indicator is lit. Doing so may damage the kaptivator’s internal hard disk. So don’t do it.

Monitors

The two color LCD monitors display different content.

MONITOR 1 displays the MAIN OUT video signal, the video source connected to VIDEO INPUT 1 or the video source connected VIDEO INPUT 2.

MONITOR 2 displays the bank list (a still image from each clip), all the video material as- sociated with a style (inputs, output, transition, etc.) or the DV input.

Changing the content of the monitors

Pressing the MONITOR SELECT key will change the information being displayed in the monitor associated with that key.

The content of the monitors can also be set to change automatically when you select a style. (☞ p.30: Style Parameter List, Monitor select setting)

Adjusting the monitors

The monitors can be adjusted individually to provide easy visibility and to compensate for factors such as viewing angle, location, surroundings, ambient lighting, etc.

1Hold down the EDIT key and press the MONITOR 1 or 2 SELECT key.

2Pressing the EDIT key will cycle through the following parameters.

Brightness: “br” will blink in the VALUE display, followed by the current value (00–99)

Contrast: “cn” will blink in the VALUE display, followed by the current value (00–99)

Color Balance: “cL” will blink in the VALUE display, followed by the current value (00–99)

3As you watch the monitor, turn the VALUE knob to set each parameter.

4Press the YES/WRITE key twice to save your settings.

If you decide not to save your settings, press the NO/ESC key twice.

12

Image 14

Contents Page Precautions About the video clip collection About your dataHandling of the internal hard disk Table of Contents Main features IntroductionControls and connectors Top panelValue knob YES/WRITE key Video Input indicator Front panelRear panel Audio Trig Input L/R jacksAbout video signal formats Connection diagramSelecting the DV connector input/output setting Basic connectionsSampling video Basic concepts and operationConcepts StylesTerms Basic operation Playback Turning the power on/offPower MonitorsSelecting a bank Selecting and playing videoPlaying a clip Selecting a styleMixing an external video source with a clip Working with external video sourcesViewing an external video source To select an external video sourceSynchronizing to music Setting the BPMSynchronized playback using the BPM setting Using an external audio signal to control an effect Synchronized playback using an audio triggerAdjusting the audio trigger level Synchronizing the start of the clip to the audio triggerLooping the playback of a motion sequence Using Motion SequencesPlaying a motion sequence Recording a motion sequenceErasing a motion sequence Choosing a style Customizing a Style -Style EditingEditing a style Style editingChanging the wipe type Editing examplesChanging the operation of the ribbon controller Sampling video Creating a clip -Sampling and Quick EditingSampling Sampling a video input sourceResampling to a clip Capturing video and using it as an input sourceMain Out Capture Erasing a clip ClipsCopying a clip Editing a clipTurning Protect On or Off Assigning a bank to a clip pad group BanksCopying a bank Copying an entire bank of clipsEntering Utility mode Utility modeOperations in Utility mode Navigating the Utility modeSetting the control change number Utility menu items and proceduresMidi setting HDD freeBacking up video data to an external device Power on setupBackup Restoring video data Restoring style or motion sequence data Preset InitializeBacking up style and motion sequence data Parameter list Style Parameter ListGroup B Operation settings Start Variation list Controller Assignment listDual Routings Routing listSingle Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Parameter A2 A5 = 01 Wipe Transition listParameter A2 A5 = 00 Fade Parameter A2 A5 = 02 WipeEnabled 1 and Enabled Effect listType 1 Specified End Point Clip parameter listPlayback Type and Playback Pattern selection Pattern 1 Normal LoopPattern 4 Reverse Normal Loop Type 2 Tempo and Beat Specified End PointPattern 3 One-Shot Pattern 5 Reverse Alternating LoopPattern 3 Reverse Normal Loop Type 3 Specified Loop Point and End PointPattern 1 Normal Pattern 4 Reverse Alternating LoopType 4 Tempo and Beat Specified Loop Point and End Point Appendix Using BPM to control the video playback speedUsing the kaptivator with your computer Tips for working with the kaptivatorManaging data on the hard drive Sampling video from your computer into the kaptivatorUsing Midi to work with clips Trobleshooting Preset Style list SpecificationsPreset Style CheatVideo Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers