Korg KTV1 Synchronized playback using an audio trigger, Adjusting the audio trigger level

Page 18

back speed will change in sync with the BPM. (☞ p.31: Style parameter list, p.19: Style edit)

3Select the clip that you want to play. Change the BPM. The clip playback speed will change according to the BPM.

Synchronized playback using an audio trigger

Adjusting the audio trigger level

1Connect the playback from as external audio device such as a CD player or a DJ mixer to the AUDIO TRIG INPUT jacks.

2As you watch the AUDIO TRIG indicator, adjust the trigger level using the TRIG LEVEL knob. The AUDIO TRIG indicator shows the state of the audio signal trigger level.

Dark (unlit): No input detected, Green: Minimum level detected, Orange: Level detected,

Red: Maximum input

Synchronizing the start of the clip to the audio trigger

1Adjust the trigger level to an appropriate level for the song, as described above.

2Choose style number “87”.

This style sets the start variation to “T3” so that the clip will begin playing when the audio input signal exceeds the trigger level. (☞ p.31: Style parameter list, p.19: Style edit)

3Press a clip pad. When the volume of the song exceeds the trigger level, the video clip will begin playing.

Using an external audio signal to control an effect

1In addition to using an audio trigger, variations in the input level of an external audio source can also be used to control certain parameters.

Connect an external audio device and set the trigger level as described in the previous ex- amples.

2Choose style number “02”.

This style assigns the effect control setting to “A1,” and varies the parameter in synchroni- zation with the trigger level. (☞ p.31: Style parameter list, p.19: Style edit)

3Touch the ribbon controller to operate it. The amount of blurring will change according to the trigger level.

16

Image 18

Contents Page Precautions About your data Handling of the internal hard diskAbout the video clip collection Table of Contents Main features IntroductionControls and connectors Top panelValue knob YES/WRITE key Video Input indicator Front panelRear panel Audio Trig Input L/R jacksAbout video signal formats Connection diagramSelecting the DV connector input/output setting Basic connectionsSampling video Basic concepts and operationConcepts StylesTerms Basic operation Playback Turning the power on/offPower MonitorsSelecting a bank Selecting and playing videoPlaying a clip Selecting a styleMixing an external video source with a clip Working with external video sourcesViewing an external video source To select an external video sourceSetting the BPM Synchronized playback using the BPM settingSynchronizing to music Using an external audio signal to control an effect Synchronized playback using an audio triggerAdjusting the audio trigger level Synchronizing the start of the clip to the audio triggerLooping the playback of a motion sequence Using Motion SequencesPlaying a motion sequence Recording a motion sequenceErasing a motion sequence Choosing a style Customizing a Style -Style EditingEditing a style Style editingEditing examples Changing the operation of the ribbon controllerChanging the wipe type Sampling video Creating a clip -Sampling and Quick EditingSampling Sampling a video input sourceCapturing video and using it as an input source Main Out CaptureResampling to a clip Erasing a clip ClipsCopying a clip Editing a clipTurning Protect On or Off Assigning a bank to a clip pad group BanksCopying a bank Copying an entire bank of clipsEntering Utility mode Utility modeOperations in Utility mode Navigating the Utility modeSetting the control change number Utility menu items and proceduresMidi setting HDD freePower on setup BackupBacking up video data to an external device Restoring video data Preset Initialize Backing up style and motion sequence dataRestoring style or motion sequence data Parameter list Style Parameter ListGroup B Operation settings Start Variation list Controller Assignment listRouting list Single RoutingsDual Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Parameter A2 A5 = 01 Wipe Transition listParameter A2 A5 = 00 Fade Parameter A2 A5 = 02 WipeEnabled 1 and Enabled Effect listType 1 Specified End Point Clip parameter listPlayback Type and Playback Pattern selection Pattern 1 Normal LoopPattern 4 Reverse Normal Loop Type 2 Tempo and Beat Specified End PointPattern 3 One-Shot Pattern 5 Reverse Alternating LoopPattern 3 Reverse Normal Loop Type 3 Specified Loop Point and End PointPattern 1 Normal Pattern 4 Reverse Alternating LoopType 4 Tempo and Beat Specified Loop Point and End Point Appendix Using BPM to control the video playback speedUsing the kaptivator with your computer Tips for working with the kaptivatorManaging data on the hard drive Sampling video from your computer into the kaptivatorUsing Midi to work with clips Trobleshooting Preset Style list SpecificationsPreset Style CheatVideo Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers