Korg KTV1 Selecting and playing video, Playing a clip, Selecting a bank, Selecting a style

Page 15

2. Selecting and playing video

Playing a clip

1Press one of the clip pad keys that are lit (green for Group A, orange for Group B). The selected clip pad will light red, and the clip that is registered to that pad will play.

2Use the ribbon controller or slider etc. to modify the video while it plays, or press another clip pad to play a different clip.

NOTE Depending on the current style, you may not see anything in the MAIN output if the slider is set to its minimum or maximum value. Set the slider to its middle or opposite position.

Changing the transition time between clips (Dissolve Rate)

To change the transition time between clips , hold down the YES/WRITE key. In the VALUE display, “E - “ will start blinking. Continue to hold down the YES/WRITE key and turn the VALUE knob to set the dissolve rate (00–99). When the value is 99, the transition time will be approximately eight seconds.

Selecting a bank

1Press the BANK key. The currently selected bank number is indicated by the two right-hand digits in the VALUE display.

2When the BANK key is blinking green, you can select a different bank for Group A. When the BANK key is blinking orange, you can change the bank assigned to Group B.

3Press the MONITOR 2 SELECT key until the BANK indicator light is lit.

4As you watch MONITOR 2, rotate the VALUE knob to select a different bank.

Selecting a style

1If you want to switch styles, press the STYLE key to enter Style mode. Each time you press this key, you will alternate between selecting a style ( the STYLE key will blink green) and changing the effect assigned to the current style (the STYLE key will blink orange).

2With the STYLE key blinking green, rotate the VALUE knob to change the style number, indicated by the two left-hand digits in the VALUE display.

3Press the flashing YES/WRITE key to confirm your style selection.

If you decide not to change styles, press the flashing NO/ESC key, or use the VALUE knob to return to the previous STYLE. The YES/WRITE and NO/ESC keys will stop flashing. If you change styles while a clip is playing, the clip may stop. If you select a style that con- tains a different routing, the clip will stop playing.

Changing the effect

1With the STYLE key blinking orange, rotate the VALUE knob to change the effect assigned to the current style. The effect number is indicated by the two left-hand digits in the VALUE display.

2Press the flashing YES/WRITE key to confirm the effect change.

If you decide not to change the effect, press the flashing NO/ESC key,

3Operate the ribbon controller to see what the effect does.

NOTE If the current style is saved with “no effect” assigned, the VALUE display will indicate “--” and you won’t be able to change effects.

Owner’s Manual

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Precautions About your data Handling of the internal hard diskAbout the video clip collection Table of Contents Introduction Main featuresTop panel Controls and connectorsValue knob YES/WRITE key Front panel Video Input indicatorAudio Trig Input L/R jacks Rear panelBasic connections Connection diagramSelecting the DV connector input/output setting About video signal formatsStyles Basic concepts and operationConcepts Sampling videoTerms Monitors Turning the power on/offPower Basic operation PlaybackSelecting a style Selecting and playing videoPlaying a clip Selecting a bankTo select an external video source Working with external video sourcesViewing an external video source Mixing an external video source with a clipSetting the BPM Synchronized playback using the BPM settingSynchronizing to music Synchronizing the start of the clip to the audio trigger Synchronized playback using an audio triggerAdjusting the audio trigger level Using an external audio signal to control an effectRecording a motion sequence Using Motion SequencesPlaying a motion sequence Looping the playback of a motion sequenceErasing a motion sequence Style editing Customizing a Style -Style EditingEditing a style Choosing a styleEditing examples Changing the operation of the ribbon controllerChanging the wipe type Sampling a video input source Creating a clip -Sampling and Quick EditingSampling Sampling videoCapturing video and using it as an input source Main Out CaptureResampling to a clip Editing a clip ClipsCopying a clip Erasing a clipTurning Protect On or Off Copying an entire bank of clips BanksCopying a bank Assigning a bank to a clip pad groupNavigating the Utility mode Utility modeOperations in Utility mode Entering Utility modeHDD free Utility menu items and proceduresMidi setting Setting the control change numberPower on setup BackupBacking up video data to an external device Restoring video data Preset Initialize Backing up style and motion sequence dataRestoring style or motion sequence data Style Parameter List Parameter listGroup B Operation settings Controller Assignment list Start Variation listRouting list Single RoutingsDual Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Parameter A2 A5 = 02 Wipe Transition listParameter A2 A5 = 00 Fade Parameter A2 A5 = 01 WipeEffect list Enabled 1 and EnabledPattern 1 Normal Loop Clip parameter listPlayback Type and Playback Pattern selection Type 1 Specified End PointPattern 5 Reverse Alternating Loop Type 2 Tempo and Beat Specified End PointPattern 3 One-Shot Pattern 4 Reverse Normal LoopPattern 4 Reverse Alternating Loop Type 3 Specified Loop Point and End PointPattern 1 Normal Pattern 3 Reverse Normal LoopType 4 Tempo and Beat Specified Loop Point and End Point Tips for working with the kaptivator Using BPM to control the video playback speedUsing the kaptivator with your computer AppendixSampling video from your computer into the kaptivator Managing data on the hard driveUsing Midi to work with clips Trobleshooting Specifications Preset Style listStyle Cheat PresetVideo Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers
Top Page Image Contents