Korg KTV1 owner manual Banks, Copying a bank, Assigning a bank to a clip pad group

3. Banks

Eight clips are saved together as a “bank.” You can save one hundred banks of clips. (Maximum 800 clips of 8 seconds; Maximum total video recording time is approximately 1 hour 46 minutes)

Selecting a bank

You can select a bank and assign it to either group of clip pads, Group A (the upper eight clip pads) or Group B (the lower eight clip pads). You can select a new bank while a clip is play- ing and you can select the same bank for both groups.

Assigning a bank to a clip pad group

1Press the BANK key. When the BANK key is blinking green, you can assign a new bank to Group A. When the BANK key is flashing orange, you can assign a new bank to Group B.

2Use the VALUE knob to change the “BANK No.” indication shown in the VALUE display and assign that bank to the selected group

Copying a bank

You can copy the currently selected bank by setting one group as the copy-source, and the other as the copy-destination

Copying an entire bank of clips

1Hold down the EDIT key and press the BANK key; the EDIT key and BANK key will blink, and you’ll be ready to copy clips.

2Use the VALUE knob to select the copy-source bank, and press any clip pad twice in the copy-source bank. The eight copy-source clips shown in MONITOR 2 will be indicated by a red frame. The BANK key will now indicate the other group

NOTE You can’t copy if you’re unable to select a vacant bank. If there is no available copy-destination, you’ll need to erase clips (☞p.23) to create a vacant bank.

3Use the VALUE knob to select the group for the copy-destination bank. If the copy-destina- tion bank is empty, the eight clips will be indicated by a blue frame.

4Press the YES/WRITE button twice to copy the bank.

Press the NO/ESC key once to un-select the copy destination (blue frame). Press the No/ESC key a second time to un-select the copy-source (red frame).

To cancel the entire Bank Copy operation, be sure the copy destination and copy-source have been un-selected, then press the NO/ESC key twice.

Owner’s Manual

25