Korg KTV1 owner manual Working with external video sources, Viewing an external video source

Page 16

3. Working with external video sources

Viewing an external video source

To view the video source connected to the VIDEO INPUT 1 jack, press the MONITOR 1 SE- LECT key to select INPUT 1. To view the video source being received by the INPUT 2 con- nector, select INPUT 2.

You can use MONITOR 2 to view the video source being received at the DV connector. Use the MONITOR 2 SELECT key to choose DV.

NOTE Set the DV connector setting to “in.”☞( p.9: DV connector in/out setting)

NOTE The image that is being input to the DV connector will be slightly delayed. We recommend that you use the INPUT jack for realtime use, such as for live video.

To select an external video source

Press the INPUT key to select one of the external video sources connected to the kaptivator. The VIDEO INPUT indicator shows the status of the selected input.

Input 1

Lit: Currently selected

 

Blinking rapidly: No connection, or wrong signal format

 

Blinking slowly: Copy-protected signal was detected

Input 2

Lit: Currently selected

 

Blinking rapidly: No connection, or wrong signal format

 

Blinking slowly: Copy-protected signal was detected

DV Input

Lit red: Currently selected (DV set to input)

 

Blinking rapidly: No connection

 

Blinking slowly: Copy-protected signal was detected

 

Green: Indicates that the DV connector is set to “Out”

dark (unlit)

Input is off (black screen), or Main Out Capture is selected

Mixing an external video source with a clip

1Press the STYLE key until it blinks green.

2Turn the VALUE knob to select “31” (style number), and press the flashing YES/WRITE key. For this example, we’ve chosen a style whose routing setting is “single.”

3Press the MONITOR 2 SELECT key to select ALL. This lets you monitor the video input, the video selected by the clip pads, and the combination of these (the image that is sent from MAIN OUT). Use the MONITOR 1 SELECT key to select MAIN. Now you can monitor the mixed image (the image that is sent from MAIN OUT) in MONITOR 1.

4Use the slider to mix between the external video source and the clip pad playback, and use the ribbon controller to apply the effect assigned to this style. The effect will be assigned to the clip pad playback, the external video source, or the mixed signal, depending on the routing setting of the current style.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Precautions Handling of the internal hard disk About your dataAbout the video clip collection Table of Contents Main features IntroductionControls and connectors Top panelValue knob YES/WRITE key Video Input indicator Front panelRear panel Audio Trig Input L/R jacksConnection diagram Selecting the DV connector input/output settingAbout video signal formats Basic connectionsBasic concepts and operation ConceptsSampling video StylesTerms Turning the power on/off PowerBasic operation Playback MonitorsSelecting and playing video Playing a clipSelecting a bank Selecting a styleWorking with external video sources Viewing an external video sourceMixing an external video source with a clip To select an external video sourceSynchronized playback using the BPM setting Setting the BPMSynchronizing to music Synchronized playback using an audio trigger Adjusting the audio trigger levelUsing an external audio signal to control an effect Synchronizing the start of the clip to the audio triggerUsing Motion Sequences Playing a motion sequenceLooping the playback of a motion sequence Recording a motion sequenceErasing a motion sequence Customizing a Style -Style Editing Editing a styleChoosing a style Style editingChanging the operation of the ribbon controller Editing examplesChanging the wipe type Creating a clip -Sampling and Quick Editing SamplingSampling video Sampling a video input sourceMain Out Capture Capturing video and using it as an input sourceResampling to a clip Clips Copying a clipErasing a clip Editing a clipTurning Protect On or Off Banks Copying a bankAssigning a bank to a clip pad group Copying an entire bank of clipsUtility mode Operations in Utility modeEntering Utility mode Navigating the Utility modeUtility menu items and procedures Midi settingSetting the control change number HDD freeBackup Power on setupBacking up video data to an external device Restoring video data Backing up style and motion sequence data Preset InitializeRestoring style or motion sequence data Parameter list Style Parameter ListGroup B Operation settings Start Variation list Controller Assignment listSingle Routings Routing listDual Routings Three-layer Routings Separate output Routings Main OUT Monitor OUT Transition list Parameter A2 A5 = 00 FadeParameter A2 A5 = 01 Wipe Parameter A2 A5 = 02 WipeEnabled 1 and Enabled Effect listClip parameter list Playback Type and Playback Pattern selectionType 1 Specified End Point Pattern 1 Normal LoopType 2 Tempo and Beat Specified End Point Pattern 3 One-ShotPattern 4 Reverse Normal Loop Pattern 5 Reverse Alternating LoopType 3 Specified Loop Point and End Point Pattern 1 NormalPattern 3 Reverse Normal Loop Pattern 4 Reverse Alternating LoopType 4 Tempo and Beat Specified Loop Point and End Point Using BPM to control the video playback speed Using the kaptivator with your computerAppendix Tips for working with the kaptivatorManaging data on the hard drive Sampling video from your computer into the kaptivatorUsing Midi to work with clips Trobleshooting Preset Style list SpecificationsPreset Style CheatVideo Effect settings Controller will apply a video Style User KTV1 Midi Implementation Data Processload Completed CONT# Midi Implementation Chart Important Notice to Consumers
Top Page Image Contents