Lantronix 900-422 manual Applying Settings, Applying Factory Defaults, WPA2/802.11i Options

		Chapter 6: Configuration Using Web Manager
WPA2/802.11i Options
	Authentication	Select Pre-Shared Keys from the drop-down list.
	Encryption	Select the encryption type from the pull-down menu. CCMP is
		the default encryption.
	Key Type	Select the key type (Hex or Passphrase).
	Key	Enter the Encryption Key in hexadecimal value if Hex is
		selected as the key type. Enter the key as a string if
		Passphrase is selected as the key type. Passphrase input is
		not the same as ASCII input.
		A passphrase of more than 20 characters is recommended.
		Spaces and punctuation characters are permitted.
Advanced Settings
	TX Data Rate	The XPress DR+W permits the control of the transmission
		data rate. Click the Auto check box to allow the unit to
		automatically set the data rate (or leave it unchecked to set
		the transmission rate manually). The default rate is 11 Mbps.
		If the Auto check box is selected, choose the maximum data
		rate from the drop down menu.
		If the Auto check box is not selected, select the fixed data
		rate (in Mbps) from the drop down menu.
		Note: The XPress DR+W supports the following additional
		rates: 18 Mbps, 24 Mbps, 36 Mbps, and 54 Mbps.
	Radio Power	Power management reduces the overall power consumption
	Management	of the XPress DR+W unit. Selecting Enable increases the
		response time. Power management is not available in Ad Hoc
		mode.

Applying Settings

1.To save and apply the configuration changes to the device server, click the Apply Settings button.

Note: Clicking OK on each page does not change the configuration on the device. OK tells the XPress DR+ what changes to use; Apply Settings makes the changes permanent and reboots the XPress DR+.

Applying Factory Defaults

1.Click the Apply Defaults button to set the device server back to the default settings. For details see Default Settings on page 91.

2.Click yes to set factory settings, or click No to cancel.

XPress DR+ User Guide 62