Lantronix 900-422 manual Connect Protocol, Connect Mode Passive Connection, Endpoint Configuration

Chapter 6: Configuration Using Web Manager

2. In the available fields, enter or modify the following information:

Connect Protocol

Protocol

From the drop-down menu, select TCP.

Connect Mode: Passive Connection

Accept Incoming	Select Yes to accept incoming connections. The default
	setting is Yes.
Password Required	Determines whether a password is required for an incoming
	passive connection. This field is not available when a
	password is set for Telnet mode. The default setting is No.
Password	If Password Required was set to Yes, enter the password for
	passive connections.

Connect Mode: Active Connection

	Active Connect	Select None (default) to disable Active Connect. Otherwise,
		select the connection type from the drop-down list:
		 With Any Character: Attempts to connect when any
		character is received from the serial port.
		 With Active Mdm Ctrl In: Accepts external
		connection requests only when the
		modem_control_in input is asserted.
		 With Start Character: Attempts to connect when it
		receives a specific start character from the serial
		port. The default start character is carriage return.
		 Manual Connection: Attempts to connect when
		directed by a command string received from the
		serial port.
		 Auto Start: Automatically connects to the remote
		IP address and port after booting up.
	Start Character	If Active Connect is set to With Start Character, enter the
		start character in this field. The default setting is 0D.
	Modem Mode	Indicates the on-screen response type when in Modem Mode
		(if Modem Mode is enabled). The default setting is None.
Endpoint Configuration
	Local Port	Enter the local port number.
	Auto increment for	Select to auto-increment the local port number for new
	active connect	outgoing connections. The range of auto-incremented port
		numbers is 50,000 to 59,999 and loops back to the beginning
		when the maximum range is reached. Disabled by default.
	Remote Port	Enter the remote port number.
	Remote Host	Enter the IP address of the remote device.

XPress DR+ User Guide 55