System Reboot
Reboot the Switch in software reset. Click Apply button to reboot the switch.
System Reboot interface
Panel List
Display the switch panel GUI. When the switch is in stacking status, it display the slaves panel GUI. When the switch is
Panel list interface
IP Stacking
This function allows switch to stack up to 8 stackable switches as a unit group. When configuring the stacking function, beware the following points.
Any port on the switch can be used to stack.
Before configuring the stacking function, make sure all stack switches are in the same network.
When configure stacking function, must configure the master switch first.
After stacking group has set up, all slave switches are configured through master switch. You still can direct access to slave switch, but all functions are read and view only.
To remove the switch from stacking group, you must remove the salve switch first.
97