LevelOne GSW-2491TXM user manual 802.1Q Vlan

Page 89

4.You will see the VLAN displays.

5.	If the groups’ list is over one page, you can click					Next Page	to view other VLAN
	groups.
6.	Use
		Delete		button to delete unwanted VLAN.
7.	Use
		Edit	button to modify existing VLAN group.

802.1Q VLAN

Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a “tag” into the Ethernet frames. Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.

You can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN, VID is 1. The default VLAN can’t be deleting.

GVRP allows automatic VLAN configuration between the switch and nodes. If the switch is connected to a device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the switch; the switch will automatically add that device to the existing VLAN.

802.1q VLAN interface

83

Image 89

Contents GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Software Features FeaturesSoftware Upgrade ManagementPort Trunk Class of ServiceSpanning Tree QOS PolicyPackage Contents Ethernet Switching Technology Front Panel Physical DimensionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMount the switch in an EIA standard 19-inch Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeStacking Workgroup Stackable switch Master Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Main MenuConsole Menu Line Control Key description Port Status Status and CountersPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP ConfigurationUser Name Configuration Password Configuration Port ConfigurationTrunk Configuration Port Mirroring Configuration Port Mirroring interface — Vlan ID Port VID 1~255 Type the Pvid Vlan ConfigurationVlan Configure Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration „ Edit static MAC address Static MAC Address „ Add the Static MAC Address„ Add the Filtering MAC Address „ Delete static MAC addressFiltering MAC Address „ Delete Filtering MAC address Misc Configuration„ Edit Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface STP Protocol Related ConfigurationForward Delay Time forward delay time STP SetupSystem Configuration Per Port Setting Snmp Community Strings „ Add Community Strings Snmp System Options„ Delete Community Name „ Edit Community Name„ Add the trap manager Trap Managers„ Delete Trap Manager Select Delete LacpWorking Ports Setting Lacp State Activity Group Status IGMP/GVRP802.1x 802.1x Setup802.1x Setup interface Per Port Configuration Misc Configuration Factory Default System Reset ConfigurationUpdate Firmware System RebootTftp Configuration Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page Preparing for Web Management About Web-based ManagementOnline Help System LoginPort status View the Port Information Port StatisticsAdministrator function, it provides the following functions AdministratorIP Address Switch Setting„ MAC Address Table Entry Basic Switch SettingsAdvanced Setting Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Port Controls Console Port InformationTrunking Aggregator setting Aggregator Information State Activity Aggregator InformationTrunking State Activity interface Igmp Snooping Forwarding and FilteringStatic MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree „ Forward Delay Time forward delay time System ConfigurationPer Port Configuration Port Mirroring Prot Mirroring interface „ System Options Snmp Management„ Trap Manager Security Manager„ Community strings 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Tftp Restore Configuration Configuration BackupTftp Backup Configuration Factory DefaultBackup File Name fill the file name „ Default IP address „ Default Gateway „ Subnet maskIP Stacking System RebootPanel List IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface Incorrect connections „ Faulty or loose cables„ Non-standard cables „ Improper Network Topologies„ Cabling Diagnosing LED IndicatorsLED Indicators Switch architectureConnector StandardPower Supply DimensionsSafety MAC address