LevelOne GSW-2491TXM user manual Port status

Page 69

Port status

In Port status, you can view every port status that depended on user setting and the negotiation result.

1.Link: “Down” is “No Link”. “UP” is “Link”.

2.State: display port statuses “disable” or “enable”. “Unlink” will be treated as “off ”.

3.Auto Negotiation: display the auto negotiation mode: auto/force/Nway-force. “Config” means the value that user configured. “Actual” means the current value of the port.

4.Speed Duplex: display port connection speed. “Config” means the value that user configured. “Actual” means the current value of the port.

5.Flow Control: Full: display the flow control status is “enable” or “disable” in full mode. “Config” means the value that user configured. “Actual” means the current value of the port.

6.Back Pressure: Display the Back Pressure status setting. “Config” means the value that user configured. “Actual” means the current value of the port.

7.Bandwidth: display the port incoming and outgoing bandwidth.

8. Priority: display the port static priority status is “High” or “Low” or “Disable”.

9.Port Security: display the port security is “enable” or “disable”.

Formatted: Bullets and Numbering

Port Status interface

63

Image 69

Contents GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Software Features FeaturesSoftware Upgrade ManagementPort Trunk Class of ServiceSpanning Tree QOS PolicyPackage Contents Ethernet Switching Technology Front Panel Physical DimensionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMount the switch in an EIA standard 19-inch Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeStacking Workgroup Stackable switch Master Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Console Menu LineMain Menu Control Key description Port Status Status and CountersPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP ConfigurationUser Name Configuration Password Configuration Port ConfigurationTrunk Configuration Port Mirroring Configuration Port Mirroring interface Vlan Configuration Vlan Configure— Vlan ID Port VID 1~255 Type the Pvid Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration „ Edit static MAC address Static MAC Address „ Add the Static MAC Address„ Delete static MAC address Filtering MAC Address„ Add the Filtering MAC Address Misc Configuration „ Edit Filtering MAC address„ Delete Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface STP Protocol Related ConfigurationSTP Setup System ConfigurationForward Delay Time forward delay time Per Port Setting Snmp Community Strings „ Add Community Strings Snmp System Options„ Delete Community Name „ Edit Community Name„ Add the trap manager Trap Managers„ Delete Trap Manager Select Delete LacpWorking Ports Setting Lacp State Activity Group Status IGMP/GVRP802.1x 802.1x Setup802.1x Setup interface Per Port Configuration Misc Configuration Factory Default System Reset ConfigurationSystem Reboot Tftp ConfigurationUpdate Firmware Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page Preparing for Web Management About Web-based ManagementOnline Help System LoginPort status View the Port Information Port StatisticsAdministrator function, it provides the following functions AdministratorIP Address Switch SettingBasic Switch Settings Advanced Setting„ MAC Address Table Entry Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Port Controls Console Port InformationTrunking Aggregator setting Aggregator Information State Activity Aggregator InformationTrunking State Activity interface Igmp Snooping Forwarding and FilteringStatic MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree System Configuration Per Port Configuration„ Forward Delay Time forward delay time Port Mirroring Prot Mirroring interface „ System Options Snmp ManagementSecurity Manager „ Community strings„ Trap Manager 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Tftp Restore Configuration Configuration BackupTftp Backup Configuration Factory DefaultBackup File Name fill the file name „ Default IP address „ Default Gateway „ Subnet maskSystem Reboot Panel ListIP Stacking IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface Incorrect connections „ Faulty or loose cables„ Non-standard cables „ Improper Network Topologies„ Cabling Diagnosing LED IndicatorsLED Indicators Switch architectureConnector StandardPower Supply DimensionsSafety MAC address