LevelOne GSW-2491TXM user manual Create Vlan Group Create Port-Based Vlan

Page 35

Drop untagged frame. Press “Space” key to select drop or forward the untagged frame.

3. Select <Save> to save the configuration.

VLAN Configure interface

Create VLAN Group

Create Port-Based VLAN

1.Select <Edit>.

2.VLAN Name: Type a name for the new VLAN, ex: VLAN01.

3.Group ID: Type the VLAN group ID. The group ID rang is from 1 to 4094.

4.Member: Press ”Space” key to change the member value. There are two types to selected:

a.Member: the port is a member port.

b.NO: it means that port is NOT a member port.

5.Press “ESC” key to go back action menu line.

6.Select <Save> to save the configuration.

NOTE: If you had configured the trunk groups, you can see it (ex: TRK1, TRK2…) in the port list. You also can configure the trunk group as the VLAN member.

29

Image 35

Contents GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Management FeaturesSoftware Features Software UpgradeQOS Policy Class of ServicePort Trunk Spanning TreePackage Contents Ethernet Switching Technology Front Panel Physical DimensionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMount the switch in an EIA standard 19-inch Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeStacking Workgroup Stackable switch Master Connecting to the SwitchConsole Management Login in the Console InterfaceMain Menu Main MenuConsole Menu Line Control Key description Port Status Status and CountersPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP ConfigurationUser Name Configuration Password Configuration Port ConfigurationTrunk Configuration Port Mirroring Configuration Port Mirroring interface — Vlan ID Port VID 1~255 Type the Pvid Vlan ConfigurationVlan Configure Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration „ Edit static MAC address Static MAC Address „ Add the Static MAC Address„ Add the Filtering MAC Address „ Delete static MAC addressFiltering MAC Address „ Delete Filtering MAC address Misc Configuration„ Edit Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface STP Protocol Related ConfigurationForward Delay Time forward delay time STP SetupSystem Configuration Per Port Setting Snmp Community Strings „ Add Community Strings Snmp System Options„ Delete Community Name „ Edit Community Name„ Add the trap manager Trap Managers„ Delete Trap Manager Select Delete LacpWorking Ports Setting Lacp State Activity Group Status IGMP/GVRP802.1x 802.1x Setup802.1x Setup interface Per Port Configuration Misc Configuration Factory Default System Reset ConfigurationUpdate Firmware System RebootTftp Configuration Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page Preparing for Web Management About Web-based ManagementOnline Help System LoginPort status View the Port Information Port StatisticsAdministrator function, it provides the following functions AdministratorIP Address Switch Setting„ MAC Address Table Entry Basic Switch SettingsAdvanced Setting Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Port Controls Console Port InformationTrunking Aggregator setting Aggregator Information State Activity Aggregator InformationTrunking State Activity interface Igmp Snooping Forwarding and FilteringStatic MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree „ Forward Delay Time forward delay time System ConfigurationPer Port Configuration Port Mirroring Prot Mirroring interface „ System Options Snmp Management„ Trap Manager Security Manager„ Community strings 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Tftp Restore Configuration Configuration Backup„ Default IP address „ Default Gateway „ Subnet mask Factory DefaultTftp Backup Configuration Backup File Name fill the file nameIP Stacking System RebootPanel List IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface „ Improper Network Topologies „ Faulty or loose cablesIncorrect connections „ Non-standard cables„ Cabling Diagnosing LED IndicatorsStandard Switch architectureLED Indicators ConnectorMAC address DimensionsPower Supply Safety