LevelOne GSW-2491TXM user manual Trunk Configuration

Page 31

7.BP: enable or disable Back Pressure function (Backpressure for half duplex mode).

8.Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It supports individual control method of TX and RX.

9.Priority: set port to high or low priority.

10.Security: enable or disable port security function.

11.Select the <Save>.

Port Configuration interface

Trunk Configuration

You can configure port trunk group.

1.Select <Edit>

2.Using “Tab” key move to the port that want to be added as trunk group.

3.Using “Space” key to mark the port.

4.Using Tab key move to TRK# (ex. TRK1, TRK2…) to change the TRK# value to Static.

5.Save the configuration by selecting <Save>.

25

Image 31

Contents GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Management FeaturesSoftware Features Software UpgradeQOS Policy Class of ServicePort Trunk Spanning TreePackage Contents Ethernet Switching Technology Front Panel Physical DimensionRear Panel LED IndicatorsAttaching Rubber Feet Desktop InstallationAttach mounting brackets with screws Rack-mounted InstallationMount the switch in an EIA standard 19-inch Rack Power OnSmall Workgroup Network ApplicationSmall Workgroup Application Segment BridgeStacking Workgroup Stackable switch Master Connecting to the SwitchConsole Management Login in the Console InterfaceConsole Menu Line Main MenuMain Menu Control Key description Port Status Status and CountersPort Counters System Information Administration Configuration Switch Static Configuration Device Information IP ConfigurationUser Name Configuration Password Configuration Port ConfigurationTrunk Configuration Port Mirroring Configuration Port Mirroring interface Vlan Configure Vlan Configuration— Vlan ID Port VID 1~255 Type the Pvid Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration „ Edit static MAC address Static MAC Address „ Add the Static MAC AddressFiltering MAC Address „ Delete static MAC address„ Add the Filtering MAC Address „ Edit Filtering MAC address Misc Configuration„ Delete Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface STP Protocol Related ConfigurationSystem Configuration STP SetupForward Delay Time forward delay time Per Port Setting Snmp Community Strings „ Add Community Strings Snmp System Options„ Delete Community Name „ Edit Community Name„ Add the trap manager Trap Managers„ Delete Trap Manager Select Delete LacpWorking Ports Setting Lacp State Activity Group Status IGMP/GVRP802.1x 802.1x Setup802.1x Setup interface Per Port Configuration Misc Configuration Factory Default System Reset ConfigurationTftp Configuration System RebootUpdate Firmware Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page Preparing for Web Management About Web-based ManagementOnline Help System LoginPort status View the Port Information Port StatisticsAdministrator function, it provides the following functions AdministratorIP Address Switch SettingAdvanced Setting Basic Switch Settings„ MAC Address Table Entry Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Port Controls Console Port InformationTrunking Aggregator setting Aggregator Information State Activity Aggregator InformationTrunking State Activity interface Igmp Snooping Forwarding and FilteringStatic MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree Per Port Configuration System Configuration„ Forward Delay Time forward delay time Port Mirroring Prot Mirroring interface „ System Options Snmp Management„ Community strings Security Manager„ Trap Manager 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Tftp Restore Configuration Configuration Backup„ Default IP address „ Default Gateway „ Subnet mask Factory DefaultTftp Backup Configuration Backup File Name fill the file namePanel List System RebootIP Stacking IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface „ Improper Network Topologies „ Faulty or loose cablesIncorrect connections „ Non-standard cables„ Cabling Diagnosing LED IndicatorsStandard Switch architectureLED Indicators ConnectorMAC address DimensionsPower Supply Safety