Installation Troubleshooting

During installation, first test the fiber and twisted pair connections with FiberAlert disabled. Then enable FiberAlert, if desired, just before final installation. This will reduce the feature’s interference with testing.

To test McPC 100Mbps by itself, use the appropriate fiber patch cable. First, connect McPC 100Mbps to the twisted pair device with a twisted pair cable. Next, look a single strand of fiber from the transmit port to the receive port of the media converter. Finally, verify that there are both twisted pair and fiber link on the media converter.

Specifications

Environmental

Operating Temperature

32° - 104° F (0° - 40° C)

Storage Temperature

21° - 160° F (-6° - 71° C)

Humidity:

5 - 95% (non-condensing)

Electrical

Input Load

100/240V±10% ~ 50/60Hz, 0.1/0.05A

Dimensions

A single PCI slot module for use in a PC chassis.

IMC Networks Technical Support

Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada);

+32-16-550880 (Europe)

Fax: (949) 465-3020

E-Mail:techsupport@imcnetworks.com

Web: www.imcnetworks.com